Remove no longer needed samsung thermal properties.

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnier...@samsung.com>
---
 arch/arm/boot/dts/exynos3250.dtsi                 |  2 +-
 arch/arm/boot/dts/exynos4.dtsi                    |  2 +-
 arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi | 20 --------------------
 arch/arm/boot/dts/exynos5250.dtsi                 |  2 +-
 arch/arm/boot/dts/exynos5410.dtsi                 |  8 ++++----
 arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi | 21 ---------------------
 arch/arm/boot/dts/exynos5420.dtsi                 | 10 +++++-----
 arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi | 20 --------------------
 arch/arm/boot/dts/exynos5440.dtsi                 |  6 +++---
 9 files changed, 15 insertions(+), 76 deletions(-)
 delete mode 100644 arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
 delete mode 100644 arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
 delete mode 100644 arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi

diff --git a/arch/arm/boot/dts/exynos3250.dtsi 
b/arch/arm/boot/dts/exynos3250.dtsi
index 0a5f989..d6e014f 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -227,7 +227,7 @@
                        interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&cmu CLK_TMU_APBIF>;
                        clock-names = "tmu_apbif";
-                       #include "exynos4412-tmu-sensor-conf.dtsi"
+                       #thermal-sensor-cells = <0>;
                        status = "disabled";
                };
 
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 909a9f2..ca1921d 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -736,7 +736,7 @@
                        reg = <0x100C0000 0x100>;
                        interrupts = <2 4>;
                        status = "disabled";
-                       #include "exynos4412-tmu-sensor-conf.dtsi"
+                       #thermal-sensor-cells = <0>;
                };
 
                jpeg_codec: jpeg-codec@11840000 {
diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi 
b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
deleted file mode 100644
index 489b58c..0000000
--- a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos4412 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majew...@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <55>;
-samsung,tmu_min_efuse_value = <40>;
-samsung,tmu_max_efuse_value = <100>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5250.dtsi 
b/arch/arm/boot/dts/exynos5250.dtsi
index 45283a6..45242ba 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -282,7 +282,7 @@
                        interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock CLK_TMU>;
                        clock-names = "tmu_apbif";
-                       #include "exynos4412-tmu-sensor-conf.dtsi"
+                       #thermal-sensor-cells = <0>;
                };
 
                sata: sata@122f0000 {
diff --git a/arch/arm/boot/dts/exynos5410.dtsi 
b/arch/arm/boot/dts/exynos5410.dtsi
index 55509c6..b8b68ec 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -93,7 +93,7 @@
                        interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock CLK_TMU>;
                        clock-names = "tmu_apbif";
-                       #include "exynos4412-tmu-sensor-conf.dtsi"
+                       #thermal-sensor-cells = <0>;
                };
 
                tmu_cpu1: tmu@10064000 {
@@ -102,7 +102,7 @@
                        interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock CLK_TMU>;
                        clock-names = "tmu_apbif";
-                       #include "exynos4412-tmu-sensor-conf.dtsi"
+                       #thermal-sensor-cells = <0>;
                };
 
                tmu_cpu2: tmu@10068000 {
@@ -111,7 +111,7 @@
                        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock CLK_TMU>;
                        clock-names = "tmu_apbif";
-                       #include "exynos4412-tmu-sensor-conf.dtsi"
+                       #thermal-sensor-cells = <0>;
                };
 
                tmu_cpu3: tmu@1006c000 {
@@ -120,7 +120,7 @@
                        interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock CLK_TMU>;
                        clock-names = "tmu_apbif";
-                       #include "exynos4412-tmu-sensor-conf.dtsi"
+                       #thermal-sensor-cells = <0>;
                };
 
                mmc_0: mmc@12200000 {
diff --git a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi 
b/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
deleted file mode 100644
index fbc77cb..0000000
--- a/arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,21 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos5420 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majew...@samsung.com>
- * Copyright (c) 2017 Krzysztof Kozlowski <k...@kernel.org>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <55>;
-samsung,tmu_min_efuse_value = <0>;
-samsung,tmu_max_efuse_value = <100>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi 
b/arch/arm/boot/dts/exynos5420.dtsi
index 2f3cb2a..85d8656 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -722,7 +722,7 @@
                        interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock CLK_TMU>;
                        clock-names = "tmu_apbif";
-                       #include "exynos5420-tmu-sensor-conf.dtsi"
+                       #thermal-sensor-cells = <0>;
                };
 
                tmu_cpu1: tmu@10064000 {
@@ -731,7 +731,7 @@
                        interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock CLK_TMU>;
                        clock-names = "tmu_apbif";
-                       #include "exynos5420-tmu-sensor-conf.dtsi"
+                       #thermal-sensor-cells = <0>;
                };
 
                tmu_cpu2: tmu@10068000 {
@@ -740,7 +740,7 @@
                        interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
                        clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-                       #include "exynos5420-tmu-sensor-conf.dtsi"
+                       #thermal-sensor-cells = <0>;
                };
 
                tmu_cpu3: tmu@1006c000 {
@@ -749,7 +749,7 @@
                        interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
                        clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-                       #include "exynos5420-tmu-sensor-conf.dtsi"
+                       #thermal-sensor-cells = <0>;
                };
 
                tmu_gpu: tmu@100a0000 {
@@ -758,7 +758,7 @@
                        interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
                        clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-                       #include "exynos5420-tmu-sensor-conf.dtsi"
+                       #thermal-sensor-cells = <0>;
                };
 
                sysmmu_g2dr: sysmmu@0x10A60000 {
diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi 
b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
deleted file mode 100644
index 0421c3d..0000000
--- a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Device tree sources for Exynos5440 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majew...@samsung.com>
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <5>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <0x5d2d>;
-samsung,tmu_min_efuse_value = <16>;
-samsung,tmu_max_efuse_value = <76>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <70>;
-samsung,tmu_default_temp_offset = <25>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5440.dtsi 
b/arch/arm/boot/dts/exynos5440.dtsi
index f3abecc4..a6323a4 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -234,7 +234,7 @@
                        interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock CLK_B_125>;
                        clock-names = "tmu_apbif";
-                       #include "exynos5440-tmu-sensor-conf.dtsi"
+                       #thermal-sensor-cells = <0>;
                };
 
                tmuctrl_1: tmuctrl@16011c {
@@ -243,7 +243,7 @@
                        interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock CLK_B_125>;
                        clock-names = "tmu_apbif";
-                       #include "exynos5440-tmu-sensor-conf.dtsi"
+                       #thermal-sensor-cells = <0>;
                };
 
                tmuctrl_2: tmuctrl@160120 {
@@ -252,7 +252,7 @@
                        interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
                        clocks = <&clock CLK_B_125>;
                        clock-names = "tmu_apbif";
-                       #include "exynos5440-tmu-sensor-conf.dtsi"
+                       #thermal-sensor-cells = <0>;
                };
 
                sata@210000 {
-- 
1.9.1

Reply via email to