[PATCH v6 3/7] remoteproc/davinci: add the missing retval check for clk_enable()

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bgolaszew...@baylibre.com>

The davinci platform is being switched to using the common clock
framework, where clk_enable() can fail. Add the return value check.

Signed-off-by: Bartosz Golaszewski <bgolaszew...@baylibre.com>
Acked-by: Suman Anna <s-a...@ti.com>
Reviewed-by: David Lechner <da...@lechnology.com>
---
 drivers/remoteproc/da8xx_remoteproc.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/remoteproc/da8xx_remoteproc.c 
b/drivers/remoteproc/da8xx_remoteproc.c
index bf3b9034c319..2b24291337b7 100644
--- a/drivers/remoteproc/da8xx_remoteproc.c
+++ b/drivers/remoteproc/da8xx_remoteproc.c
@@ -138,6 +138,7 @@ static int da8xx_rproc_start(struct rproc *rproc)
        struct device *dev = rproc->dev.parent;
        struct da8xx_rproc *drproc = (struct da8xx_rproc *)rproc->priv;
        struct clk *dsp_clk = drproc->dsp_clk;
+       int ret;
 
        /* hw requires the start (boot) address be on 1KB boundary */
        if (rproc->bootaddr & 0x3ff) {
@@ -148,7 +149,12 @@ static int da8xx_rproc_start(struct rproc *rproc)
 
        writel(rproc->bootaddr, drproc->bootreg);
 
-       clk_enable(dsp_clk);
+       ret = clk_enable(dsp_clk);
+       if (ret) {
+               dev_err(dev, "clk_enable() failed: %d\n", ret);
+               return ret;
+       }
+
        davinci_clk_reset_deassert(dsp_clk);
 
        return 0;
-- 
2.17.0