The Meson-AXG S400 board is shipped with AP6255 wifi module,
which is actually using the brcmfmac 43455 driver.

Signed-off-by: Yixun Lan <[email protected]>
---
 .../arm64/boot/dts/amlogic/meson-axg-s400.dts | 44 ++++++++++++++++++-
 1 file changed, 43 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts 
b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index f67d4e47e641..b3e1bdca32bb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -51,7 +51,16 @@
 
        sdio_pwrseq: sdio-pwrseq {
                compatible = "mmc-pwrseq-simple";
-               reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+               reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
+               clocks = <&wifi32k>;
+               clock-names = "ext_clock";
+       };
+
+       wifi32k: wifi32k {
+               compatible = "pwm-clock";
+               #clock-cells = <0>;
+               clock-frequency = <32768>;
+               pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
        };
 };
 
@@ -86,6 +95,12 @@
        pinctrl-names = "default";
 };
 
+&pwm_ab {
+       status = "okay";
+       pinctrl-0 = <&pwm_a_x20_pins>;
+       pinctrl-names = "default";
+};
+
 /* emmc storage */
 &sd_emmc_c {
        status = "okay";
@@ -105,3 +120,30 @@
        vmmc-supply = <&vcc_3v3>;
        vqmmc-supply = <&vddio_boot>;
 };
+
+/* wifi module */
+&sd_emmc_b {
+       status = "okay";
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       pinctrl-0 = <&sdio_pins>;
+       pinctrl-1 = <&sdio_clk_gate_pins>;
+       pinctrl-names = "default", "clk-gate";
+
+       bus-width = <4>;
+       cap-sd-highspeed;
+       max-frequency = <100000000>;
+       non-removable;
+       disable-wp;
+
+       mmc-pwrseq = <&sdio_pwrseq>;
+
+       vmmc-supply = <&vddao_3v3>;
+       vqmmc-supply = <&vddio_boot>;
+
+       brcmf: wifi@1 {
+               reg = <1>;
+               compatible = "brcm,bcm4329-fmac";
+       };
+};
-- 
2.17.0

Reply via email to