[PATCH net-next v3 07/10] arm64: dts: marvell: mcbin: add 10G SFP support

[Antoine Tenart]

From: Russell King <rmk+ker...@armlinux.org.uk>

This patch adds the SFP cage description in the Marvell Armada 8040
mcbin, for both 10G interfaces.

Signed-off-by: Russell King <rmk+ker...@armlinux.org.uk>
[Antoine: small reworks, commit message]
Signed-off-by: Antoine Tenart <antoine.ten...@bootlin.com>
---
 .../boot/dts/marvell/armada-8040-mcbin.dts    | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts 
b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index 81de03ef860d..eaa67de8c2bb 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
@@ -64,6 +64,30 @@
                compatible = "usb-nop-xceiv";
                vcc-supply = <&v_5v0_usb3_hst_vbus>;
        };
+
+       sfp_eth0: sfp-eth0 {
+               /* CON15,16 - CPM lane 4 */
+               compatible = "sff,sfp";
+               i2c-bus = <&sfpp0_i2c>;
+               los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
+               mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
+               tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+               tx-fault-gpio  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&cp1_sfpp0_pins>;
+       };
+
+       sfp_eth1: sfp-eth1 {
+               /* CON17,18 - CPS lane 4 */
+               compatible = "sff,sfp";
+               i2c-bus = <&sfpp1_i2c>;
+               los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+               mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+               tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
+               tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
+       };
 };
 
 &uart0 {
@@ -180,6 +204,10 @@
                               "mpp60", "mpp61";
                marvell,function = "sdio";
        };
+       cp0_sfpp1_pins: sfpp1-pins {
+               marvell,pins = "mpp62";
+               marvell,function = "gpio";
+       };
 };
 
 &cp0_xmdio {
@@ -188,11 +216,13 @@
        phy0: ethernet-phy@0 {
                compatible = "ethernet-phy-ieee802.3-c45";
                reg = <0>;
+               sfp = <&sfp_eth0>;
        };
 
        phy8: ethernet-phy@8 {
                compatible = "ethernet-phy-ieee802.3-c45";
                reg = <8>;
+               sfp = <&sfp_eth1>;
        };
 };
 
@@ -258,6 +288,10 @@
 };
 
 &cp1_pinctrl {
+       cp1_sfpp1_pins: sfpp1-pins {
+               marvell,pins = "mpp8", "mpp10", "mpp11";
+               marvell,function = "gpio";
+       };
        cp1_spi1_pins: spi1-pins {
                marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15", "mpp16";
                marvell,function = "spi1";
@@ -266,6 +300,10 @@
                marvell,pins = "mpp6", "mpp7";
                marvell,function = "uart0";
        };
+       cp1_sfpp0_pins: sfpp0-pins {
+               marvell,pins = "mpp26", "mpp27", "mpp28", "mpp29";
+               marvell,function = "gpio";
+       };
 };
 
 /* J27 UART header */
-- 
2.17.0