On Thu, May 17, 2018 at 03:58:58PM +0530, Vijay Viswanath wrote: > From: Sayali Lokhande <[email protected]> > > For SDCC version 5.0.0 and higher, new compatible string > "qcom,sdhci-msm-v5" is added. > > Based on the msm variant, pick the relevant variant data and > use it for register read/write to msm specific registers. > > Signed-off-by: Sayali Lokhande <[email protected]> > Signed-off-by: Vijay Viswanath <[email protected]> > --- > .../devicetree/bindings/mmc/sdhci-msm.txt | 5 +-
Please split binding patches. > drivers/mmc/host/sdhci-msm.c | 344 > +++++++++++++-------- > 2 files changed, 222 insertions(+), 127 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt > b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt > index bfdcdc4..c2b7b2b 100644 > --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt > +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt > @@ -4,7 +4,10 @@ This file documents differences between the core properties > in mmc.txt > and the properties used by the sdhci-msm driver. > > Required properties: > -- compatible: Should contain "qcom,sdhci-msm-v4". > +- compatible: Should contain "qcom,sdhci-msm-v4" or "qcom,sdhci-msm-v5". Format with 1 per line. > + For SDCC version 5.0.0, MCI registers are removed from SDCC > + interface and some registers are moved to HC. New compatible > + string is added to support this change - "qcom,sdhci-msm-v5". > - reg: Base address and length of the register in the following order: > - Host controller register map (required) > - SD Core register map (required)
