Secondary CPUs should have the same information in DeviceTree as booting
CPU from both correctness point of view and for possible hotplug
scenarios.
Suggested-by: Viresh Kumar <viresh.ku...@linaro.org>
Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
---
arch/arm/boot/dts/exynos5420-cpus.dtsi | 6 ++++++
arch/arm/boot/dts/exynos5422-cpus.dtsi | 8 +++++++-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi
b/arch/arm/boot/dts/exynos5420-cpus.dtsi
index a8e449471304..0ee6e92a3c29 100644
--- a/arch/arm/boot/dts/exynos5420-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
@@ -38,6 +38,7 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x1>;
+ clocks = <&clock CLK_ARM_CLK>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
@@ -49,6 +50,7 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x2>;
+ clocks = <&clock CLK_ARM_CLK>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
@@ -60,6 +62,7 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x3>;
+ clocks = <&clock CLK_ARM_CLK>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
@@ -83,6 +86,7 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x101>;
+ clocks = <&clock CLK_KFC_CLK>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
@@ -94,6 +98,7 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x102>;
+ clocks = <&clock CLK_KFC_CLK>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
@@ -105,6 +110,7 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x103>;
+ clocks = <&clock CLK_KFC_CLK>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi
b/arch/arm/boot/dts/exynos5422-cpus.dtsi
index 7c130a00d1a8..e4a5857c135f 100644
--- a/arch/arm/boot/dts/exynos5422-cpus.dtsi
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -37,6 +37,7 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x101>;
+ clocks = <&clock CLK_KFC_CLK>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
@@ -48,6 +49,7 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x102>;
+ clocks = <&clock CLK_KFC_CLK>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
@@ -59,6 +61,7 @@
device_type = "cpu";
compatible = "arm,cortex-a7";
reg = <0x103>;
+ clocks = <&clock CLK_KFC_CLK>;
clock-frequency = <1000000000>;
cci-control-port = <&cci_control0>;
operating-points-v2 = <&cluster_a7_opp_table>;
@@ -69,8 +72,8 @@
cpu4: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a15";
- clocks = <&clock CLK_ARM_CLK>;
reg = <0x0>;
+ clocks = <&clock CLK_ARM_CLK>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
@@ -82,6 +85,7 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x1>;
+ clocks = <&clock CLK_ARM_CLK>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
@@ -93,6 +97,7 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x2>;
+ clocks = <&clock CLK_ARM_CLK>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
@@ -104,6 +109,7 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x3>;
+ clocks = <&clock CLK_ARM_CLK>;
clock-frequency = <1800000000>;
cci-control-port = <&cci_control1>;
operating-points-v2 = <&cluster_a15_opp_table>;
--
2.14.1
