On Wed, 2018-05-30 at 10:35 +0800, honghui.zh...@mediatek.com wrote:
> From: Honghui Zhang <honghui.zh...@mediatek.com>
> 
> The MTCMOS of PCIe Host for MT2712 will be off when system suspend, and all
> the internel control register will be reset after system resume. The PCIe
> link should be re-established and the related control register values should
> be re-set after system resume.
> 
> Signed-off-by: Honghui Zhang <honghui.zh...@mediatek.com>
> CC: Ryder Lee <ryder....@mediatek.com>
> ---
>  drivers/pci/host/pcie-mediatek.c | 82 
> ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 82 insertions(+)
> 
> diff --git a/drivers/pci/host/pcie-mediatek.c 
> b/drivers/pci/host/pcie-mediatek.c
> index dabf1086..60f98d92 100644
> --- a/drivers/pci/host/pcie-mediatek.c
> +++ b/drivers/pci/host/pcie-mediatek.c
> @@ -132,12 +132,14 @@ struct mtk_pcie_port;
>  /**
>   * struct mtk_pcie_soc - differentiate between host generations
>   * @need_fix_class_id: whether this host's class ID needed to be fixed or not
> + * @pm_support: whether the host's MTCMOS will be off when suspend
>   * @ops: pointer to configuration access functions
>   * @startup: pointer to controller setting functions
>   * @setup_irq: pointer to initialize IRQ functions
>   */
>  struct mtk_pcie_soc {
>       bool need_fix_class_id;
> +     bool pm_support;
>       struct pci_ops *ops;
>       int (*startup)(struct mtk_pcie_port *port);
>       int (*setup_irq)(struct mtk_pcie_port *port, struct device_node *node);
> @@ -1179,12 +1181,91 @@ static int mtk_pcie_probe(struct platform_device 
> *pdev)
>       return err;
>  }
>  
> +static int __maybe_unused mtk_pcie_suspend_noirq(struct device *dev)
> +{
> +     struct platform_device *pdev;
> +     struct mtk_pcie *pcie;
> +     struct mtk_pcie_port *port;
> +     const struct mtk_pcie_soc *soc;
> +
> +     pdev = to_platform_device(dev);
> +     pcie = platform_get_drvdata(pdev);

How about this -
struct mtk_pcie *pcie = dev_get_drvdata(dev);

> +     soc = pcie->soc;
> +     if (!soc->pm_support)
> +             return 0;
> +
> +     list_for_each_entry(port, &pcie->ports, list) {
> +             clk_disable_unprepare(port->ahb_ck);
> +             clk_disable_unprepare(port->sys_ck);
> +             phy_power_off(port->phy);
> +     }
> +
> +     return 0;
> +}
> +
> +static int __maybe_unused mtk_pcie_resume_noirq(struct device *dev)
> +{
> +     struct platform_device *pdev;
> +     struct mtk_pcie *pcie;
> +     struct mtk_pcie_port *port;
> +     const struct mtk_pcie_soc *soc;
> +     int ret;
> +
> +     pdev = to_platform_device(dev);
> +     pcie = platform_get_drvdata(pdev);

struct mtk_pcie *pcie = dev_get_drvdata(dev);

> +     soc = pcie->soc;
> +     if (!soc->pm_support)
> +             return 0;
> +
> +     list_for_each_entry(port, &pcie->ports, list) {
> +             ret = phy_power_on(port->phy);
> +             if (ret) {
> +                     dev_err(dev, "could not power on phy\n");
> +                     return ret;
> +             }
> +             ret = clk_prepare_enable(port->sys_ck);
> +             if (ret) {
> +                     dev_err(dev, "enable sys clock error\n");
> +                     phy_power_off(port->phy);
> +                     return ret;
> +             }
> +
> +             ret = clk_prepare_enable(port->ahb_ck);
> +             if (ret) {
> +                     dev_err(dev, "enable ahb clock error\n");
> +                     phy_power_off(port->phy);
> +                     clk_disable_unprepare(port->sys_ck);
> +                     return ret;
> +             }
> +
> +             ret = soc->startup(port);
> +             if (ret) {
> +                     dev_err(dev, "pcie linkup failed\n");
> +                     phy_power_off(port->phy);
> +                     clk_disable_unprepare(port->sys_ck);
> +                     clk_disable_unprepare(port->ahb_ck);
> +                     return ret;
> +             }
> +
> +             if (IS_ENABLED(CONFIG_PCI_MSI))
> +                     mtk_pcie_enable_msi(port);
> +     }
> +
> +     return 0;
> +}
> +



Reply via email to