* John Stultz <john.stu...@linaro.org> [180612 22:15]:
> Hey Folks,
> I noticed with linus/master wifi wasn't coming up on HiKey960. I
> bisected it down and it seems to be due to:
>
> 60f36637bbbd ("wlcore: sdio: allow pm to handle sdio power") and
> 728a9dc61f13 ("wlcore: sdio: Fix flakey SDIO runtime PM handling")
>
> When wifi fails to load, the only useful error message I see is:
> [ 8.466097] wl1271_sdio mmc1:0001:2: wl12xx_sdio_power_on: failed
> to get_sync(-13)
Sorry to hear about that.
> Reverting those two changes gets wifi working again for me:
> [ 8.754953] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
> [ 8.761778] random: crng init done
> [ 8.765185] random: 7 urandom warning(s) missed due to ratelimiting
> [ 8.779149] wlcore: loaded
> ...
> [ 12.945903] wlcore: PHY firmware version: Rev 8.2.0.0.237
> [ 13.058077] wlcore: firmware booted (Rev 8.9.0.0.70)
>
>
> Any suggestions how to resolve this w/o a revert?
Sounds like we need to ignore also -EACCES if runtime PM is
disabled for MMC. Care to try and see if the patch below
helps?
Regards,
Tony
8< ------------------------
diff --git a/drivers/net/wireless/ti/wlcore/sdio.c
b/drivers/net/wireless/ti/wlcore/sdio.c
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -155,7 +155,7 @@ static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue
*glue)
struct mmc_card *card = func->card;
ret = pm_runtime_get_sync(&card->dev);
- if (ret < 0) {
+ if (ret < 0 && ret != -EACCES) {
pm_runtime_put_noidle(&card->dev);
dev_err(glue->dev, "%s: failed to get_sync(%d)\n",
__func__, ret);
@@ -182,7 +182,7 @@ static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue
*glue)
/* Let runtime PM know the card is powered off */
error = pm_runtime_put(&card->dev);
- if (error < 0 && error != -EBUSY) {
+ if (error < 0 && error != -EBUSY && error != -EACCES) {
dev_err(&card->dev, "%s failed: %i\n", __func__, error);
return error;
