* Nishanth Menon <[email protected]> [180619 19:46]: > + cbass_main: cbass@100000 { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x00100000 0x00 0x00100000 0x00020000>, /* ctrl mmr */ > + <0x00600000 0x00 0x00600000 0x00001100>, /* GPIO */ > + <0x00900000 0x00 0x00900000 0x00012000>, /* serdes */ > + <0x01000000 0x00 0x01000000 0x0af02400>, /* Most > peripherals */ > + <0x30800000 0x00 0x30800000 0x0bc00000>, /* MAIN NAVSS > */ > + /* MCUSS Range */ > + <0x28380000 0x00 0x28380000 0x03880000>, > + <0x40200000 0x00 0x40200000 0x00900100>, > + <0x42040000 0x00 0x42040000 0x03ac2400>, > + <0x45100000 0x00 0x45100000 0x00c24000>, > + <0x46000000 0x00 0x46000000 0x00200000>, > + <0x47000000 0x00 0x47000000 0x00068400>; > + > + cbass_mcu: cbass@28380000 { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0x28380000 0x28380000 0x03880000>, /* MCU > NAVSS*/ > + <0x40200000 0x40200000 0x00900100>, /* First > peripheral window */ > + <0x42040000 0x42040000 0x03ac2400>, /* WKUP */ > + <0x45100000 0x45100000 0x00c24000>, /* MMRs, > remaining NAVSS */ > + <0x46000000 0x46000000 0x00200000>, /* CPSW */ > + <0x47000000 0x47000000 0x00068400>; /* OSPI > space 1 */ > + > + cbass_wakeup: cbass@42040000 { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + /* WKUP Basic peripherals */ > + ranges = <0x42040000 0x42040000 0x03ac2400>; > + }; > + }; > + }; > +};
You should use cbass_main: interconnect@1000000 and so on here. Other than that looks good to me, thanks for updating it. Regards, Tony
