The "Beaglebone Enhanced" by Sancloud is based on the Beaglebone Black,
but with the following differences:

 * Gigabit capable PHY
 * Extra USB hub, optional i2c control
 * lps3331ap barometer connected over i2c
 * MPU6050 6 axis MEMS accelerometer/gyro connected over i2c
 * 1GiB DDR3 RAM
 * RTL8723 Wifi/Bluetooth connected over USB

This series adds the Sancloud vendor prefix as well as the actual dts.

v3: Drop 1GHz Opp tweak
v2: * Add missing #include <dt-bindings/interrupt-controller/irq.h>
    * Fix barometer compatible string
v1: Initial submission, not the dts actually tested :/

Also double checked if the kbuild error has been fixed:

koen@beast:/build/pkg/linux-torvalds$ git describe
koen@beast:/build/pkg/linux-torvalds$ ARCH=arm 
CROSS_COMPILE=arm-angstrom-linux-gnueabi- make am335x-sancloud-bbe.dtb
  DTC     arch/arm/boot/dts/am335x-sancloud-bbe.dtb

Same successful result on tmlind/for-next (which has v2 already) and 

Koen Kooi (2):
  dt-bindings: Add vendor prefix for Sancloud
  ARM: dts: am335x: add am335x-sancloud-bbe board support

 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/am335x-sancloud-bbe.dts          | 146 +++++++++++++++++++++
 3 files changed, 148 insertions(+)
 create mode 100644 arch/arm/boot/dts/am335x-sancloud-bbe.dts


Reply via email to