Hi Ryder,
On 16/07/18 16:59, Ryder Lee wrote:
> Add some misc nodes support - timer and ARM CCI-400.
>
> Signed-off-by: Ryder Lee <[email protected]>
> ---
> arch/arm64/boot/dts/mediatek/mt7622.dtsi | 36
> ++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> index 9213c96..8cdec52 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
> @@ -217,6 +217,16 @@
> #reset-cells = <1>;
> };
>
> + timer: timer@10004000 {
> + compatible = "mediatek,mt7622-timer",
> + "mediatek,mt6577-timer";
> + reg = <0 0x10004000 0 0x80>;
> + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&infracfg CLK_INFRA_APXGPT_PD>,
> + <&topckgen CLK_TOP_RTC>;
> + clock-names = "system-clk", "rtc-clk";
> + };
> +
> scpsys: scpsys@10006000 {
> compatible = "mediatek,mt7622-scpsys",
> "syscon";
> @@ -317,6 +327,32 @@
> <0 0x10360000 0 0x2000>;
> };
>
> + cci: cci@10390000 {
> + compatible = "arm,cci-400";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0 0x10390000 0 0x1000>;
> + ranges = <0 0 0x10390000 0x10000>;
>From my understanding of the binding description ranges should hold child
address, parent address and size of the region in the child address space. I can
see in arch/arm64 two different variants using 4 ranges values (like here) and
using three values.
@Rob + Will what is the preferred way to describe this?
> +
> + cci_control0: slave-if@1000 {
> + compatible = "arm,cci-400-ctrl-if";
> + interface-type = "ace-lite";
> + reg = <0x1000 0x1000>;
> + };
Don't we need to add phandles to the cci-control-port property in the cpu nodes?
Regards,
Matthias
> +
> + cci_control1: slave-if@4000 {
> + compatible = "arm,cci-400-ctrl-if";
> + interface-type = "ace";
> + reg = <0x4000 0x1000>;
> + };
> +
> + cci_control2: slave-if@5000 {
> + compatible = "arm,cci-400-ctrl-if";
> + interface-type = "ace";
> + reg = <0x5000 0x1000>;
> + };
> + };
> +
> auxadc: adc@11001000 {
> compatible = "mediatek,mt7622-auxadc";
> reg = <0 0x11001000 0 0x1000>;
>
