* fix connector compatibility (composite)
* add comment for gpio1 23
* fix port reg number
* add proper #address-cells
* we use only one venc_out channel
* fix invert-polarity for the VENC since we have an inverting OPA362 Amplifier
Signed-off-by: H. Nikolaus Schaller <h...@goldelico.com>
---
arch/arm/boot/dts/omap3-gta04.dtsi | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi
b/arch/arm/boot/dts/omap3-gta04.dtsi
index 2db670e2a4bd..fa887743860e 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -131,7 +131,7 @@
};
tv0: connector {
- compatible = "svideo-connector";
+ compatible = "composite-video-connector";
label = "tv";
port {
@@ -143,7 +143,7 @@
tv_amp: opa362 {
compatible = "ti,opa362";
- enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; /* GPIO_23 to
enable video out amplifier */
ports {
#address-cells = <1>;
@@ -157,7 +157,7 @@
};
port@1 {
- reg = <1>;
+ reg = <0>;
opa_out: endpoint {
remote-endpoint = <&tv_connector_in>;
};
@@ -551,10 +551,14 @@
vdda-supply = <&vdac>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
port {
+ reg = <0>;
venc_out: endpoint {
remote-endpoint = <&opa_in>;
- ti,channels = <2>;
+ ti,channels = <1>;
ti,invert-polarity;
};
};
--
2.12.2
