From: Jacopo Mondi <jacopo+rene...@jmondi.org>
Add documentation for Aptina MT9V111 image sensor.
Reviewed-by: Rob Herring <r...@kernel.org>
Signed-off-by: Jacopo Mondi <jacopo+rene...@jmondi.org>
---
.../bindings/media/i2c/aptina,mt9v111.txt | 46 ++++++++++++++++++++++
MAINTAINERS | 8 ++++
2 files changed, 54 insertions(+)
create mode 100644
Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
new file mode 100644
index 0000000..bd896e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
@@ -0,0 +1,46 @@
+* Aptina MT9V111 CMOS sensor
+----------------------------
+
+The Aptina MT9V111 is a 1/4-Inch VGA-format digital image sensor with a core
+based on Aptina MT9V011 sensor and an integrated Image Flow Processor (IFP).
+
+The sensor has an active pixel array of 640x480 pixels and can output a number
+of image resolution and formats controllable through a simple two-wires
+interface.
+
+Required properties:
+--------------------
+
+- compatible: shall be "aptina,mt9v111".
+- clocks: reference to the system clock input provider.
+
+Optional properties:
+--------------------
+
+- enable-gpios: output enable signal, pin name "OE#". Active low.
+- standby-gpios: low power state control signal, pin name "STANDBY".
+ Active high.
+- reset-gpios: chip reset signal, pin name "RESET#". Active low.
+
+The device node must contain one 'port' child node with one 'endpoint' child
+sub-node for its digital output video port, in accordance with the video
+interface bindings defined in:
+Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+--------
+
+ &i2c1 {
+ camera@48 {
+ compatible = "aptina,mt9v111";
+ reg = <0x48>;
+
+ clocks = <&camera_clk>;
+
+ port {
+ mt9v111_out: endpoint {
+ remote-endpoint = <&ceu_in>;
+ };
+ };
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index bbd9b9b..4ab113c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -9651,6 +9651,14 @@ F:
Documentation/devicetree/bindings/media/i2c/mt9v032.txt
F: drivers/media/i2c/mt9v032.c
F: include/media/i2c/mt9v032.h
+MT9V111 APTINA CAMERA SENSOR
+M: Jacopo Mondi <jac...@jmondi.org>
+L: linux-me...@vger.kernel.org
+T: git git://linuxtv.org/media_tree.git
+S: Maintained
+F: Documentation/devicetree/bindings/media/i2c/aptina,mt9v111.txt
+F: drivers/media/i2c/mt9v111.c
+
MULTIFUNCTION DEVICES (MFD)
M: Lee Jones <lee.jo...@linaro.org>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git
--
2.7.4
