[PATCH v2 1/3] dt-bindings: soc: Add ZynqMP PM bindings

[Jolly Shah]

From: Rajan Vaja <rajan.v...@xilinx.com>

Add documentation to describe Xilinx ZynqMP power management
bindings.

Signed-off-by: Rajan Vaja <rajan.v...@xilinx.com>
Signed-off-by: Jolly Shah <jol...@xilinx.com>
---
 .../bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt    | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git 
a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt 
b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
index d215d15..cb9a6b7 100644
--- a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
@@ -64,6 +64,17 @@ Output clocks are registered based on clock information 
received
 from firmware. Output clocks indexes are mentioned in
 include/dt-bindings/clock/xlnx,zynqmp-clk.h.
 
+--------------------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC Power Management
+--------------------------------------------------------------------
+The zynqmp-power node describes the power management configurations.
+It will control remote suspend/shutdown interfaces.
+
+Required properties:
+ - compatible:         Must contain:   "xlnx,zynqmp-power"
+ - interrupt-parent:   Interrupt controller the interrupt is routed through
+ - interrupts:         Interrupt specifier
+
 -------
 Example
 -------
@@ -78,5 +89,10 @@ firmware {
                        clocks = <&pss_ref_clk>, <&video_clk>, 
<&pss_alt_ref_clk>, <&aux_ref_clk>, <&gt_crx_ref_clk>;
                        clock-names = "pss_ref_clk", "video_clk", 
"pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
                };
+               zynqmp_power: zynqmp-power {
+                       compatible = "xlnx,zynqmp-power";
+                       interrupt-parent = <&gic>;
+                       interrupts = <0 35 4>;
+               };
        };
 };
-- 
2.7.4