Setting a stdout-path in the .dtb is convenient because then the user
gets a serial console on the RS-232 connector without any extra effort
of figuring out the relevant 'console=' boot parameter.
Reviewed-by: Fabio Estevam <fabio.este...@nxp.com>
Signed-off-by: Tuomas Tynkkynen <tuo...@tuxera.com>
---
v2: Make subject line consistent
---
arch/arm/boot/dts/imx6qdl-wandboard.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
index e1afa54404d0..0ef34c31f7c6 100644
--- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi
@@ -8,6 +8,10 @@
#include <dt-bindings/gpio/gpio.h>
/ {
+ chosen {
+ stdout-path = &uart1;
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
--
2.16.3
