[PATCH v2 32/34] ARM: tegra: colibri_t30: add mcp2515 vdd and xceiver supplies

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswi...@toradex.com>

Add the MCP2515 SPI CAN controller's vdd-supply being the regular
carrier board's reg_3v3 and xceiver-supply being reg_5v0.

Signed-off-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>

---

Changes in v2: None

 arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts 
b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 618a4b3b6bc8..9985d0a91f69 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -88,6 +88,8 @@
                        /* CAN_INT */
                        interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_EDGE_FALLING>;
                        spi-max-frequency = <10000000>;
+                       vdd-supply = <&reg_3v3>;
+                       xceiver-supply = <&reg_5v0>;
                };
        };
 
-- 
2.14.4