From: Marcel Ziswiler <[email protected]>

Add missing regulators:
- reg_module_3v3_audio being VDDA supply of SGTL5000
- VDDD supply of SGTL5000 actually being reg_1v8_vio
- reg_lan_v_bus being USB Ethernet chip vbus supply
- carrier board HDMI supply being reg_5v0
- carrier board reg_3v3 actually being backlight and panel power supply

Signed-off-by: Marcel Ziswiler <[email protected]>

---

Changes in v2: None

 arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 10 ++++++++++
 arch/arm/boot/dts/tegra30-colibri.dtsi        | 21 ++++++++++++++++++++-
 2 files changed, 30 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts 
b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 5eb665d89435..1c057b285153 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -29,6 +29,7 @@
                };
                hdmi@54280000 {
                        status = "okay";
+                       hdmi-supply = <&reg_5v0>;
                };
        };
 
@@ -127,6 +128,7 @@
                default-brightness-level = <6>;
                /* BL_ON */
                enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+               power-supply = <&reg_3v3>;
        };
 
        clocks {
@@ -159,6 +161,7 @@
                compatible = "edt,et057090dhu", "simple-panel";
 
                backlight = <&backlight>;
+               power-supply = <&reg_3v3>;
        };
 
        pwmleds {
@@ -181,6 +184,13 @@
                };
        };
 
+       reg_3v3: regulator-3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "3.3V_SW";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+       };
+
        reg_5v0: regulator-5v0 {
                compatible = "regulator-fixed";
                regulator-name = "5V_SW";
diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi 
b/arch/arm/boot/dts/tegra30-colibri.dtsi
index 4d7ed25bd594..dc54eb734f64 100644
--- a/arch/arm/boot/dts/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/tegra30-colibri.dtsi
@@ -229,7 +229,8 @@
                sgtl5000: codec@a {
                        compatible = "fsl,sgtl5000";
                        reg = <0x0a>;
-                       VDDA-supply = <&reg_module_3v3>;
+                       VDDA-supply = <&reg_module_3v3_audio>;
+                       VDDD-supply = <&reg_1v8_vio>;
                        VDDIO-supply = <&reg_module_3v3>;
                        clocks = <&tegra_car TEGRA30_CLK_EXTERN1>;
                };
@@ -442,6 +443,7 @@
        usb-phy@7d004000 {
                status = "okay";
                nvidia,is-wired = <1>;
+               vbus-supply = <&reg_lan_v_bus>;
        };
 
        clocks {
@@ -485,6 +487,15 @@
                regulator-always-on;
        };
 
+       reg_lan_v_bus: regulator-lan-v-bus {
+               compatible = "regulator-fixed";
+               regulator-name = "LAN_V_BUS";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               enable-active-high;
+               gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>;
+       };
+
        reg_module_3v3: regulator-module-3v3 {
                compatible = "regulator-fixed";
                regulator-name = "+V3.3";
@@ -493,6 +504,14 @@
                regulator-always-on;
        };
 
+       reg_module_3v3_audio: regulator-module-3v3-audio {
+               compatible = "regulator-fixed";
+               regulator-name = "+V3.3_AUDIO_AVDD_S";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-always-on;
+       };
+
        sound {
                compatible = "toradex,tegra-audio-sgtl5000-colibri_t30",
                             "nvidia,tegra-audio-sgtl5000";
-- 
2.14.4

Reply via email to