This patch adds a device tree for the ConnectCore 6UL SBC Pro board, based
on the ConnectCore 6UL SOM.
Changes since v1 [1]:
* Removed unused pinctrl nodes
* Replace undocumented vendor BSP node by using GPIO hogs
* Formatting changes:
* Change node names to use dashes instead of underscores
[1]
https://lore.kernel.org/lkml/[email protected]/
Alex Gonzalez (1):
ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Pro
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts | 394 ++++++++++++++++++++++++++++
2 files changed, 395 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6ul-ccimx6ulsbcpro.dts
