On 20/09/2018 10:03, Guo Ren wrote:
> Changelog:
> - Add License and Copyright
> - Use timer-of framework
> - Change name with upstream feedback
> - Use clksource_mmio framework
>
> Signed-off-by: Guo Ren <[email protected]>
> ---
> drivers/clocksource/Kconfig | 8 ++
> drivers/clocksource/Makefile | 1 +
> drivers/clocksource/timer-gx6605s.c | 150
> ++++++++++++++++++++++++++++++++++++
> 3 files changed, 159 insertions(+)
> create mode 100644 drivers/clocksource/timer-gx6605s.c
>
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index a11f4ba..6d0f18d 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -620,4 +620,12 @@ config RISCV_TIMER
> is accessed via both the SBI and the rdcycle instruction. This is
> required for all RISC-V systems.
>
> +config GX6605S_TIMER
> + bool "Gx6605s SOC system timer driver"
> + depends on CSKY
> + select CLKSRC_MMIO
> + select TIMER_OF
> + help
> + This option enables support for gx6605s SOC's timer.
> +
> endmenu
Please make the option not visible as default. There are currently two
approaches look at MTK_TIMER and SPRD_TIMER.
Apart the two nits below, the driver looks fine.
Thanks!
-- Daniel
> diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
> index db51b24..dc5621d 100644
> --- a/drivers/clocksource/Makefile
> +++ b/drivers/clocksource/Makefile
> @@ -79,3 +79,4 @@ obj-$(CONFIG_CLKSRC_ST_LPC) += clksrc_st_lpc.o
> obj-$(CONFIG_X86_NUMACHIP) += numachip.o
> obj-$(CONFIG_ATCPIT100_TIMER) += timer-atcpit100.o
> obj-$(CONFIG_RISCV_TIMER) += riscv_timer.o
> +obj-$(CONFIG_GX6605S_TIMER) += timer-gx6605s.o
> diff --git a/drivers/clocksource/timer-gx6605s.c
> b/drivers/clocksource/timer-gx6605s.c
> new file mode 100644
> index 0000000..10194c9
> --- /dev/null
> +++ b/drivers/clocksource/timer-gx6605s.c
> @@ -0,0 +1,150 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
> +
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/sched_clock.h>
> +
> +#include "timer-of.h"
> +
> +#define CLKSRC_OFFSET 0x40
> +
> +#define TIMER_STATUS 0x00
> +#define TIMER_VALUE 0x04
> +#define TIMER_CONTRL 0x10
> +#define TIMER_CONFIG 0x20
> +#define TIMER_DIV 0x24
> +#define TIMER_INI 0x28
> +
> +#define GX6605S_STATUS_CLR BIT(0)
> +#define GX6605S_CONTRL_RST BIT(0)
> +#define GX6605S_CONTRL_START BIT(1)
> +#define GX6605S_CONFIG_EN BIT(0)
> +#define GX6605S_CONFIG_IRQ_EN BIT(1)
> +
> +static irqreturn_t gx6605s_timer_interrupt(int irq, void *dev)
> +{
> + struct clock_event_device *ce = (struct clock_event_device *) dev;
nit: no cast is needed.
> + void __iomem *base = timer_of_base(to_timer_of(ce));
> +
> + writel_relaxed(GX6605S_STATUS_CLR, base + TIMER_STATUS);
> +
> + ce->event_handler(ce);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int gx6605s_timer_set_oneshot(struct clock_event_device *ce)
> +{
> + void __iomem *base = timer_of_base(to_timer_of(ce));
> +
> + /* reset and stop counter */
> + writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL);
> +
> + /* enable with irq and start */
> + writel_relaxed(GX6605S_CONFIG_EN | GX6605S_CONFIG_IRQ_EN, base +
> TIMER_CONFIG);
> +
> + return 0;
> +}
> +
> +static int gx6605s_timer_set_next_event(unsigned long delta, struct
> clock_event_device *ce)
> +{
> + void __iomem *base = timer_of_base(to_timer_of(ce));
> +
> + /* use reset to pause timer */
> + writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL);
> +
> + /* config next timeout value */
> + writel_relaxed(ULONG_MAX - delta, base + TIMER_INI);
> + writel_relaxed(GX6605S_CONTRL_START, base + TIMER_CONTRL);
> +
> + return 0;
> +}
> +
> +static int gx6605s_timer_shutdown(struct clock_event_device *ce)
> +{
> + void __iomem *base = timer_of_base(to_timer_of(ce));
> +
> + writel_relaxed(0, base + TIMER_CONTRL);
> + writel_relaxed(0, base + TIMER_CONFIG);
> +
> + return 0;
> +}
> +
> +static struct timer_of to = {
> + .flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
> + .clkevt = {
> + .rating = 300,
> + .features = CLOCK_EVT_FEAT_DYNIRQ |
> + CLOCK_EVT_FEAT_ONESHOT,
> + .set_state_shutdown = gx6605s_timer_shutdown,
> + .set_state_oneshot = gx6605s_timer_set_oneshot,
> + .set_next_event = gx6605s_timer_set_next_event,
> + .cpumask = cpu_possible_mask,
> + },
> + .of_irq = {
> + .handler = gx6605s_timer_interrupt,
> + .flags = IRQF_TIMER | IRQF_IRQPOLL,
> + },
> +};
> +
> +static u64 notrace gx6605s_sched_clock_read(void)
> +{
> + void __iomem *base;
> +
> + base = timer_of_base(&to) + CLKSRC_OFFSET;
> +
> + return (u64) readl_relaxed(base + TIMER_VALUE);
nit: extra space after '(u64)'
> +}
> +
> +static void gx6605s_clkevt_init(void __iomem *base)
> +{
> + writel_relaxed(0, base + TIMER_DIV);
> + writel_relaxed(0, base + TIMER_CONFIG);
> +
> + clockevents_config_and_register(&to.clkevt, timer_of_rate(&to), 2,
> ULONG_MAX);
> +}
> +
> +static int gx6605s_clksrc_init(void __iomem *base)
> +{
> + writel_relaxed(0, base + TIMER_DIV);
> + writel_relaxed(0, base + TIMER_INI);
> +
> + writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL);
> +
> + writel_relaxed(GX6605S_CONFIG_EN, base + TIMER_CONFIG);
> +
> + writel_relaxed(GX6605S_CONTRL_START, base + TIMER_CONTRL);
> +
> + sched_clock_register(gx6605s_sched_clock_read, 32, timer_of_rate(&to));
> +
> + return clocksource_mmio_init(base + TIMER_VALUE, "gx6605s",
> timer_of_rate(&to),
> + 200, 32, clocksource_mmio_readl_up);
> +}
> +
> +static int __init gx6605s_timer_init(struct device_node *np)
> +{
> + int ret;
> +
> + /*
> + * The timer driver is for nationalchip gx6605s SOC and there are two
> same timer
> + * in gx6605s. We use one for clkevt and another for clksrc.
> + *
> + * The timer is mmio map to access, so we need give mmio addres in dts.
> + *
> + * It provides a 32bit countup timer and interrupt will be caused by
> count-overflow.
> + * So we need set-next-event by ULONG_MAX - delta in TIMER_INI reg.
> + *
> + * The counter at 0x0 offset is clock event.
> + * The counter at 0x40 offset is clock source.
> + * They are the same in hardware, just different used by driver.
> + */
> + ret = timer_of_init(np, &to);
> + if (ret)
> + return ret;
> +
> + gx6605s_clkevt_init(timer_of_base(&to));
> +
> + return gx6605s_clksrc_init(timer_of_base(&to) + CLKSRC_OFFSET);
> +}
> +TIMER_OF_DECLARE(csky_gx6605s_timer, "csky,gx6605s-timer",
> gx6605s_timer_init);
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
