On 09/23/2018 07:47 PM, Jerry Hoemann wrote:
> On Fri, Sep 21, 2018 at 05:42:00PM -0600, Shuah Khan wrote:
>> Hi Jerry,
>>
>> Thanks for the patch. A few comments below:
>
> Replies inline.
>
>>
>> On 09/21/2018 04:55 PM, Jerry Hoemann wrote:
>>> Add command line arguments to call ioctl WDIOC_GETTIMEOUT,
>>> WDIOC_GETPRETIMEOUT and WDIOC_SETPRETIMEOUT.
>>>
>>> Signed-off-by: Jerry Hoemann <jerry.hoem...@hpe.com>
>>> ---
>>> tools/testing/selftests/watchdog/watchdog-test.c | 30
>>> +++++++++++++++++++++++-
>>> 1 file changed, 29 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/tools/testing/selftests/watchdog/watchdog-test.c
>>> b/tools/testing/selftests/watchdog/watchdog-test.c
>>> index 6e29087..4861e2c 100644
>>> --- a/tools/testing/selftests/watchdog/watchdog-test.c
>>> +++ b/tools/testing/selftests/watchdog/watchdog-test.c
>>> @@ -19,7 +19,7 @@
>>>
>>> int fd;
>>> const char v = 'V';
>>> -static const char sopts[] = "bdehp:t:";
>>> +static const char sopts[] = "bdehp:t:Tn:N";
>>> static const struct option lopts[] = {
>>> {"bootstatus", no_argument, NULL, 'b'},
>>> {"disable", no_argument, NULL, 'd'},
>>> @@ -27,6 +27,9 @@
>>> {"help", no_argument, NULL, 'h'},
>>> {"pingrate", required_argument, NULL, 'p'},
>>> {"timeout", required_argument, NULL, 't'},
>>> + {"gettimeout", no_argument, NULL, 'T'},
>>> + {"pretimeout", required_argument, NULL, 'n'},
>>> + {"getpretimeout", no_argument, NULL, 'N'},
>>> {NULL, no_argument, NULL, 0x0}
>>> };
>>>
>>> @@ -71,6 +74,9 @@ static void usage(char *progname)
>>> printf(" -h, --help Print the help message\n");
>>> printf(" -p, --pingrate=P Set ping rate to P seconds (default
>>> %d)\n", DEFAULT_PING_RATE);
>>> printf(" -t, --timeout=T Set timeout to T seconds\n");
>>> + printf(" -T, --gettimeout Get the timeout\n");
>>> + printf(" -n, --pretimeout Set the pretimeout to T seconds\n");
>>> + printf(" -N, --getpretimeout Get the pretimeout\n");
>>
>> How are the new arguments used?
>
> I forgot the param. Should be:
>
> + printf(" -n, --pretimeout=T Set the pretimeout to T seconds\n");
>
>
> I'll update in v2.
Okay.
>
> Is this what you mean? Or did I misunderstand?
> >
>>
>>> printf("\n");
>>> printf("Parameters are parsed left-to-right in real-time.\n");
>>> printf("Example: %s -d -t 10 -p 5 -e\n", progname);
>>
>> Please add an example usage for each of these new arguments.
>
> Will do.
okay.
>
>>
>>> @@ -135,6 +141,28 @@ int main(int argc, char *argv[])
>>> else
>>> printf("WDIOC_SETTIMEOUT errno '%s'\n",
>>> strerror(errno));
>>> break;
>>> + case 'T':
>>> + ret = ioctl(fd, WDIOC_GETTIMEOUT, &flags);
>>> + if (!ret)
>>> + printf("Watchdog timeout set to %u seconds.\n",
>>> flags);
>>
>> It would good to make this message different from the WDIOC_SETTIMEOUT
>> message.
>> Please update it to reflect that this is the result of a WDIOC_GETTIMEOUT.
>
> Will update message to make distinct.
>
>>
>> What would user intend to do with this GETTIMEOUT? Shouldn't this be the
>> case that it
>> prints the current value and exits instead of the same logic as SETTIMEOUT
>> option?
>
> Are you suggesting setting the "oneshot" flag so the test app doesn't actually
> go into the while(1) keep_alive loop?
>
> Watchdog drivers may adjust the requested value to match hardware constraints.
> Callers of set timeout (and set pretimeout) should call get timeout to see
> what
> value was actually set.
>
> B/c of above, I just got into the habit of specifying both flags: first set,
> then get to make sure value set was what I intended.
>
> But I can make the "Get" a one shot. Just let me know if this is your
> preference.
I prefer that both GETs be oneshot. GETs should just print the current value
and go
follow oneshot path. It doesn't make sense for them to do more.
>
>
>>
>>> + else
>>> + printf("WDIOC_GETTIMEOUT errno '%s'\n",
>>> strerror(errno))
>>
>> Shouldn't this error be an exit condition?
>
> Hmmm, I don't see this error path much different than the error path for the
> other failing ioctl. Am I missing something?
Yeah that is what I don't understand with the new code as well as the existing.
Shouldn't error path be handled differently. What is the point in doing more
other than gracefully exit closing the file? I don't think existing error paths
are doing this, probably they should.
>
>
> But, If we make the "GET" a one shot, then we wouldn't really need to
> special case the failure case as we wouldn't go into the keep_alive
> loop in either case.
>
>
Right.
>
>>
>>> + break;
>>> + case 'n':
>>> + flags = strtoul(optarg, NULL, 0);
>>> + ret = ioctl(fd, WDIOC_SETPRETIMEOUT, &flags);
>>> + if (!ret)
>>> + printf("Watchdog pretimeout set to %u
>>> seconds.\n", flags);
>>> + else
>>> + printf("WDIOC_SETPRETIMEOUT errno '%s'\n",
>>> strerror(errno));
>>> + break;
>>> + case 'N':
>>> + ret = ioctl(fd, WDIOC_GETPRETIMEOUT, &flags);
>>> + if (!ret)
>>> + printf("Watchdog pretimeout set to %u
>>> seconds.\n", flags);
>>
>> It would good to make this message different from the WDIOC_GETPRETIMEOUT
>> message.
>> Please update it to reflect that this is the result of a WDIOC_GETPRETIMEOUT
>
> will do.
>
Okay.
>>
>> What would user intend to do with this GETTIMEOUT? Shouldn't this be the
>> case that it
>> prints the current value and exits instead of the same logic as
>> WDIOC_SETPRETIMEOUT?
>
> I think you're just asking me to set the "oneshot" flag on this,
> which I can certainly do.
Correct. For couple of reasons. GET/SET_PRETIMEOUG might not be supported on all
platforms/drivers. It would make sense to handle error paths correctly.
>
> But, some background on pretimeout that (I think) is interesting:
>
> The underling HW for the watchdog on proliants allows for the pre-timeout to
> be enabled or disabled. But if the pretimeout is enabled, the value of
> the pretimeout is hard coded by HW (9 seconds.)
>
> The hpwdt driver allows for setting pretimeout by passing in a value
> 0 < pretimeout < timeout
> to enable a pretimeout. The user then needs to call get pretimeout to
> determine the actual value.
>
> Failure to take into account the pretimeout when pinging the WD can lead to
> unexpected system crashes.
>
> I've handled the following issue multiple times:
>
> A user wants to set the timeout to value T and ping the WD every T/2 seconds.
> He fails to take into account the pretimeout value of P. The system crashes
> with the pretimeout NMI when (T/2) < P.
>
> The basic misunderstanding is that to prevent the WD from acting, the WD
> only needs to be pinged at least once every T seconds, when in actuality the
> WD needs to be pinged at least once every (T-P) seconds.
>
> Specifically for Proliants, I've seen people set the timeout to 10 seconds
> thinking they had plenty of time to ping the WD only to be surprised when
> the pretimeout NMI takes the system down 1 second later.
In this case, this patch really doesn't solve the problem. You will still run
into this problem if user does a set. You are providing a way to check
pretimeout,
however that is a separate operation. So I am not clear on how this patch solves
the issue of pretimeout NMI takes the system down.
>
> Note: a WD doesn't need to support the pretimeout feature.
It isn't clear what this means?
>
>>
>>> + else
>>> + printf("WDIOC_GETPRETIMEOUT errno '%s'\n",
>>> strerror(errno));
>>
>> Shouldn't this error be an exit condition?
>
> Similar to above. I can make GETPRETIMEOUT a "oneshot" to handle both the
> success/failing case of the ioctl call.
>
>>
>>> + break;
>>> default:
>>> usage(argv[0]);
>>> goto end;
>>>
>>
>> Also can you run this test as normal user?
>
> No. Must be run as root to open /dev/watchdog. When /dev/watchdog is
> opened, the
> WD is started and if not updated properly, the system will crash.
Hmm. I don't understand why the system would panic if non-root user can't open
the
device, at least in the context of this test.
fd = open("/dev/watchdog", O_WRONLY);
if (fd == -1) {
printf("Watchdog device not enabled.\n");
exit(-1);
}
Shouldn't it just exit based on the code above?
>
> "cat /dev/watchdog" is one of my favorite ways to crash a system. :) :)
That doesn't sound great, if a non-root user can bring the system down!!
thanks,
-- Shuah
