Hi Jacek,
On 3 October 2018 at 04:25, Jacek Anaszewski <jacek.anaszew...@gmail.com> wrote:
> Hi Baolin,
>
> Thank you for the v14. We'll probably need v15, though :-)
>
> I added the comments in the code below.
>
> On 10/02/2018 05:43 PM, Baolin Wang wrote:
>> This patch adds one new led trigger that LED device can configure
>> the software or hardware pattern and trigger it.
>>
>> Consumers can write 'pattern' file to enable the software pattern
>> which alters the brightness for the specified duration with one
>> software timer.
>>
>> Moreover consumers can write 'hw_pattern' file to enable the hardware
>> pattern for some LED controllers which can autonomously control
>> brightness over time, according to some preprogrammed hardware
>> patterns.
>>
>> Signed-off-by: Raphael Teysseyre <rteysse...@gmail.com>
>> Signed-off-by: Baolin Wang <baolin.w...@linaro.org>
>> ---
>> Changes from v13:
>> - Add duration validation for gradual dimming.
>> - Coding style optimization.
>>
>> Changes from v12:
>> - Add gradual dimming support for software pattern.
>>
>> Changes from v11:
>> - Change -1 means repeat indefinitely.
>>
>> Changes from v10:
>> - Change 'int' to 'u32' for delta_t field.
>>
>> Changes from v9:
>> - None.
>>
>> Changes from v8:
>> - None.
>>
>> Changes from v7:
>> - Move the SC27XX hardware patterns description into its own ABI file.
>>
>> Changes from v6:
>> - Improve commit message.
>> - Optimize the description of the hw_pattern file.
>> - Simplify some logics.
>>
>> Changes from v5:
>> - Add one 'hw_pattern' file for hardware patterns.
>>
>> Changes from v4:
>> - Change the repeat file to return the originally written number.
>> - Improve comments.
>> - Fix some build warnings.
>>
>> Changes from v3:
>> - Reset pattern number to 0 if user provides incorrect pattern string.
>> - Support one pattern.
>>
>> Changes from v2:
>> - Remove hardware_pattern boolen.
>> - Chnage the pattern string format.
>>
>> Changes from v1:
>> - Use ATTRIBUTE_GROUPS() to define attributes.
>> - Introduce hardware_pattern flag to determine if software pattern
>> or hardware pattern.
>> - Re-implement pattern_trig_store_pattern() function.
>> - Remove pattern_get() interface.
>> - Improve comments.
>> - Other small optimization.
>> ---
>> .../ABI/testing/sysfs-class-led-trigger-pattern | 76 ++++
>> drivers/leds/trigger/Kconfig | 7 +
>> drivers/leds/trigger/Makefile | 1 +
>> drivers/leds/trigger/ledtrig-pattern.c | 431
>> +++++++++++++++++++++
>> include/linux/leds.h | 15 +
>> 5 files changed, 530 insertions(+)
>> create mode 100644 Documentation/ABI/testing/sysfs-class-led-trigger-pattern
>> create mode 100644 drivers/leds/trigger/ledtrig-pattern.c
>>
>> diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
>> b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
>> new file mode 100644
>> index 0000000..22d7af7
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-pattern
>> @@ -0,0 +1,76 @@
>> +What: /sys/class/leds/<led>/pattern
>> +Date: September 2018
>> +KernelVersion: 4.20
>> +Description:
>> + Specify a software pattern for the LED, that supports altering
>> + the brightness for the specified duration with one software
>> + timer. It can do gradual dimming and constant brightness.
>> +
>> + The pattern is given by a series of tuples, of brightness and
>> + duration (ms). The LED is expected to traverse the series and
>> + each brightness value for the specified duration. Duration of
>> + 0 means brightness should immediately change to new value.
>> +
>> + 1. When doing gradual dimming, the led brightness will be
>> updated
>> + every 50 milliseconds, so the duration of each step should not
>> + less than 50 milliseconds.
>
> I'd like to avoid this constraint. Lowest supported delta_t should be 1.
>
> We should only prevent entering dimming mode if current delta_t
> is lower than UPDATE_INTERVAL.
I do not think so. If the pattern format is used for dimming and the
delta_t is lower than UPDATE_INTERVAL, we should return errors. Since
in this case, we can not change to constant mode.
Like you mentioned:
echo "10 49 20 49" > pattern
We can not enter dimming, meanwhile the pattern format is not used for
constant brightness, so should return errors for the invalid pattern
values.
> I also propose to make the dimming interval configurable via sysfs
> dimming_interval file.
So the dimming_interva range is [1, 50] milliseconds?
I am fine with this. Pavel, do you also agree with adding one new file
to set the dimming interval or keep it as simple now?
>
>> The gradual dimming format of the
>> + software pattern values should be:
>> + "brightness_1 duration_1 brightness_2 duration_2 brightness_3
>> + duration_3 ...". For example:
>> +
>> + echo 0 1000 255 2000 > pattern
>> +
>> + It will make the LED go gradually from zero-intensity to max
>> (255)
>> + intensity in 1000 milliseconds, then back to zero intensity in
>> 2000
>> + milliseconds:
>> +
>> + LED brightness
>> + ^
>> + 255-| / \ / \ /
>> + | / \ / \ /
>> + | / \ / \ /
>> + | / \ / \ /
>> + 0-| / \/ \/
>> + +---0----1----2----3----4----5----6------------> time (s)
>> +
>> + 2. To make the LED go instantly from one brigntess value to
>> another,
>> + we should use use zero-time lengths. So the format should be:
>> + "brightness_1 duration_1 brightness_1 0 brightness_2 duration_2
>> + brightness_2 0 ...". For example:
>> +
>> + echo 0 1000 0 0 255 2000 255 0 > pattern
>> +
>> + It will make the LED stay off for one second, then stay at max
>> brightness
>> + for two seconds:
>> +
>> + LED brightness
>> + ^
>> + 255-| +---------+ +---------+
>> + | | | | |
>> + | | | | |
>> + | | | | |
>> + 0-| -----+ +----+ +----
>> + +---0----1----2----3----4----5----6------------> time (s)
>> +
>> +What: /sys/class/leds/<led>/hw_pattern
>> +Date: September 2018
>> +KernelVersion: 4.20
>> +Description:
>> + Specify a hardware pattern for the LED, for LED hardware that
>> + supports autonomously controlling brightness over time,
>> according
>> + to some preprogrammed hardware patterns.
>> +
>> + Since different LED hardware can have different semantics of
>> + hardware patterns, each driver is expected to provide its own
>> + description for the hardware patterns in their ABI
>> documentation
>> + file.
>> +
>> +What: /sys/class/leds/<led>/repeat
>> +Date: September 2018
>> +KernelVersion: 4.20
>> +Description:
>> + Specify a pattern repeat number. -1 means repeat indefinitely,
>> + other negative numbers and number 0 are invalid.
>> +
>> + This file will always return the originally written repeat
>> + number.
>> diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
>> index 4018af7..b76fc3c 100644
>> --- a/drivers/leds/trigger/Kconfig
>> +++ b/drivers/leds/trigger/Kconfig
>> @@ -129,4 +129,11 @@ config LEDS_TRIGGER_NETDEV
>> This allows LEDs to be controlled by network device activity.
>> If unsure, say Y.
>>
>> +config LEDS_TRIGGER_PATTERN
>> + tristate "LED Pattern Trigger"
>> + help
>> + This allows LEDs to be controlled by a software or hardware pattern
>> + which is a series of tuples, of brightness and duration (ms).
>> + If unsure, say N
>> +
>> endif # LEDS_TRIGGERS
>> diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile
>> index f3cfe19..9bcb64e 100644
>> --- a/drivers/leds/trigger/Makefile
>> +++ b/drivers/leds/trigger/Makefile
>> @@ -13,3 +13,4 @@ obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) +=
>> ledtrig-transient.o
>> obj-$(CONFIG_LEDS_TRIGGER_CAMERA) += ledtrig-camera.o
>> obj-$(CONFIG_LEDS_TRIGGER_PANIC) += ledtrig-panic.o
>> obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
>> +obj-$(CONFIG_LEDS_TRIGGER_PATTERN) += ledtrig-pattern.o
>> diff --git a/drivers/leds/trigger/ledtrig-pattern.c
>> b/drivers/leds/trigger/ledtrig-pattern.c
>> new file mode 100644
>> index 0000000..92a0fd0
>> --- /dev/null
>> +++ b/drivers/leds/trigger/ledtrig-pattern.c
>> @@ -0,0 +1,431 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +
>> +/*
>> + * LED pattern trigger
>> + *
>> + * Idea discussed with Pavel Machek. Raphael Teysseyre implemented
>> + * the first version, Baolin Wang simplified and improved the approach.
>> + */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/leds.h>
>> +#include <linux/module.h>
>> +#include <linux/mutex.h>
>> +#include <linux/slab.h>
>> +#include <linux/timer.h>
>> +
>> +#define MAX_PATTERNS 1024
>> +/*
>> + * When doing gradual dimming, the led brightness will be updated
>> + * every 50 milliseconds.
>> + */
>> +#define UPDATE_INTERVAL 50
>> +
>> +struct pattern_trig_data {
>> + struct led_classdev *led_cdev;
>> + struct led_pattern patterns[MAX_PATTERNS];
>> + struct led_pattern *curr;
>> + struct led_pattern *next;
>> + struct mutex lock;
>> + u32 npatterns;
>> + int repeat;
>> + int last_repeat;
>> + int delta_t;
>> + bool is_indefinite;
>> + bool is_hw_pattern;
>> + struct timer_list timer;
>> +};
>> +
>> +static void pattern_trig_update_patterns(struct pattern_trig_data *data)
>> +{
>> + data->curr = data->next;
>> + if (!data->is_indefinite && data->curr == data->patterns)
>> + data->repeat--;
>> +
>> + if (data->next == data->patterns + data->npatterns - 1)
>> + data->next = data->patterns;
>> + else
>> + data->next++;
>> +
>> + data->delta_t = 0;
>> +}
>> +
>> +static int pattern_trig_compute_brightness(struct pattern_trig_data *data)
>> +{
>> + int step_brightness;
>> +
>> + if (data->delta_t == 0)
>> + return data->curr->brightness;
>> +
>> + step_brightness = abs(data->next->brightness - data->curr->brightness);
>> + step_brightness = data->delta_t * step_brightness /
>> data->curr->delta_t;
>> +
>> + if (data->next->brightness > data->curr->brightness)
>> + return data->curr->brightness + step_brightness;
>> + else
>> + return data->curr->brightness - step_brightness;
>> +}
>> +
>> +static void pattern_trig_timer_function(struct timer_list *t)
>> +{
>> + struct pattern_trig_data *data = from_timer(data, t, timer);
>> +
>> + mutex_lock(&data->lock);
>> +
>> + for (; ;) {
>
> This whitespace between semicolons looks odd. Please remove it.
Sure.
>
>> + if (!data->is_indefinite && !data->repeat)
>> + break;
>> +
>> + if (data->curr->brightness == data->next->brightness) {
>> + /* Constant brightness */
>> + led_set_brightness(data->led_cdev,
>> + data->curr->brightness);
>> + mod_timer(&data->timer,
>> + jiffies +
>> msecs_to_jiffies(data->curr->delta_t));
>> +
>> + /* Skip the step with zero duration */
>> + pattern_trig_update_patterns(data);
>> + /* Select next step */
>> + pattern_trig_update_patterns(data);
>> + break;
>> + } else {
>> + /* Gradual dimming */
>> +
>> + /*
>> + * If the accumulation time is larger than current
>> + * step duration, we should go next one and re-check
>> + * if we repeated done.
>> + */
>> + if (data->delta_t > data->curr->delta_t) {
>> + pattern_trig_update_patterns(data);
>> + continue;
>> + }
>> +
>> + led_set_brightness(data->led_cdev,
>> +
>> pattern_trig_compute_brightness(data));
>> + mod_timer(&data->timer,
>> + jiffies + msecs_to_jiffies(UPDATE_INTERVAL));
>> + /* Accumulate the gradual dimming time */
>> + data->delta_t += UPDATE_INTERVAL;
>> + break;
>> + }
>
> Why two "break" statements instead of one here?
Yes, can remove one. Sorry for the quick version patch set without
much self-checking in the night. Thanks for your comments.
--
Baolin Wang
Best Regards
