On Thu 2018-10-11 11:51:16, Dan Murphy wrote: > Remove support for the LM3697 LED device > from the ti-lmu. The LM3697 will be supported > via a stand alone LED driver. > > Signed-off-by: Dan Murphy <[email protected]>
NAK.
Pavel
> index c885cf89b8ce..920f910be4e9 100644
> --- a/Documentation/devicetree/bindings/mfd/ti-lmu.txt
> +++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
> @@ -9,7 +9,6 @@ TI LMU driver supports lighting devices below.
> LM3632 Backlight and regulator
> LM3633 Backlight, LED and fault monitor
> LM3695 Backlight
> - LM3697 Backlight and fault monitor
>
> Required properties:
> - compatible: Should be one of:
> @@ -18,11 +17,10 @@ Required properties:
> "ti,lm3632"
> "ti,lm3633"
> "ti,lm3695"
> - "ti,lm3697"
> - reg: I2C slave address.
> 0x11 for LM3632
> 0x29 for LM3631
> - 0x36 for LM3633, LM3697
> + 0x36 for LM3633
> 0x38 for LM3532
> 0x63 for LM3695
>
> @@ -38,7 +36,6 @@ Optional nodes:
> Required properties:
> - compatible: Should be one of:
> "ti,lm3633-fault-monitor"
> - "ti,lm3697-fault-monitor"
> - leds: LED properties for LM3633. Please refer to [2].
> - regulators: Regulator properties for LM3631 and LM3632.
> Please refer to [3].
> @@ -220,24 +217,3 @@ lm3695@63 {
> };
> };
> };
> -
> -lm3697@36 {
> - compatible = "ti,lm3697";
> - reg = <0x36>;
> -
> - enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
> -
> - backlight {
> - compatible = "ti,lm3697-backlight";
> -
> - lcd {
> - led-sources = <0 1 2>;
> - ramp-up-msec = <200>;
> - ramp-down-msec = <200>;
> - };
> - };
> -
> - fault-monitor {
> - compatible = "ti,lm3697-fault-monitor";
> - };
> -};
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
signature.asc
Description: Digital signature
