[PATCH v2 5/7] mtd: m25p80: add support of octal I/O transfer

[Yogesh Narayan Gaur]

Add support for octal I/O data transfer based on the controller (spi)
mode.
Assign hw-capability mask bits for octal transfer.

Signed-off-by: Yogesh Gaur <yogeshnarayan.g...@nxp.com>
---
Changes for v2:
 Incorporated review comments of Boris.

 drivers/mtd/devices/m25p80.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index cb14cf9..e5e632c 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -175,7 +175,14 @@ static int m25p_probe(struct spi_mem *spimem)
        spi_mem_set_drvdata(spimem, flash);
        flash->spimem = spimem;
 
-       if (spi->mode & SPI_RX_QUAD) {
+       if (spi->mode & SPI_RX_OCTAL) {
+               hwcaps.mask |= SNOR_HWCAPS_READ_1_1_8;
+
+               if (spi->mode & SPI_TX_OCTAL)
+                       hwcaps.mask |= (SNOR_HWCAPS_READ_1_8_8 |
+                                       SNOR_HWCAPS_PP_1_1_8 |
+                                       SNOR_HWCAPS_PP_1_8_8);
+       } else if (spi->mode & SPI_RX_QUAD) {
                hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;
 
                if (spi->mode & SPI_TX_QUAD)
-- 
2.7.4