Add flags for Octo mode I/O data transfer
Required for the SPI controller which can do the data transfer (TX/RX)
on 8 data lines e.g. NXP FlexSPI controller.
SPI_TX_OCTO: transmit with 8 wires
SPI_RX_OCTO: receive with 8 wires
Signed-off-by: Yogesh Gaur <yogeshnarayan.g...@nxp.com>
---
Changes for v3:
- Modified string 'octal' with 'octo'.
- Add octo mode support in spi_setup().
Changes for v2:
- Incorporated review comments of Boris.
drivers/spi/spi.c | 12 ++++++++++--
include/linux/spi/spi.h | 2 ++
2 files changed, 12 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index ec395a6..6d57fa7 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1573,6 +1573,9 @@ static int of_spi_parse_dt(struct spi_controller *ctlr,
struct spi_device *spi,
case 4:
spi->mode |= SPI_TX_QUAD;
break;
+ case 8:
+ spi->mode |= SPI_TX_OCTO;
+ break;
default:
dev_warn(&ctlr->dev,
"spi-tx-bus-width %d not supported\n",
@@ -1591,6 +1594,9 @@ static int of_spi_parse_dt(struct spi_controller *ctlr,
struct spi_device *spi,
case 4:
spi->mode |= SPI_RX_QUAD;
break;
+ case 8:
+ spi->mode |= SPI_RX_OCTO;
+ break;
default:
dev_warn(&ctlr->dev,
"spi-rx-bus-width %d not supported\n",
@@ -2770,14 +2776,16 @@ int spi_setup(struct spi_device *spi)
/* if it is SPI_3WIRE mode, DUAL and QUAD should be forbidden
*/
if ((spi->mode & SPI_3WIRE) && (spi->mode &
- (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)))
+ (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTO |
+ SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTO)))
return -EINVAL;
/* help drivers fail *cleanly* when they need options
* that aren't supported with their current controller
*/
bad_bits = spi->mode & ~spi->controller->mode_bits;
ugly_bits = bad_bits &
- (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD);
+ (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTO |
+ SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTO);
if (ugly_bits) {
dev_warn(&spi->dev,
"setup: ignoring unsupported mode bits %x\n",
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index a64235e..cea4e49 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -163,6 +163,8 @@ struct spi_device {
#define SPI_TX_QUAD 0x200 /* transmit with 4
wires */
#define SPI_RX_DUAL 0x400 /* receive with 2 wires
*/
#define SPI_RX_QUAD 0x800 /* receive with 4 wires
*/
+#define SPI_TX_OCTO 0x1000 /* transmit with 8
wires */
+#define SPI_RX_OCTO 0x2000 /* receive with 8 wires
*/
int irq;
void *controller_state;
void *controller_data;
--
2.7.4
