Hi,
On 23/11/18 18:24, Tony Lindgren wrote:
> Hi,
>
> * Roger Quadros <rog...@ti.com> [181122 11:39]:
>> From: Suman Anna <s-a...@ti.com>
>> +Example:
>> +========
>> +1. /* AM33xx PRU-ICSS */
>> + pruss_soc_bus: pruss_soc_bus@4a326004 {
>> + compatible = "ti,am3356-pruss-soc-bus";
>> + ti,hwmods = "pruss";
>> + reg = <0x4a326004 0x4>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>
> The top level interconnect target module driver should be just ti-sysc
> as documented in Documentation/devicetree/bindings/bus/ti-sysc.txt.
> AFAIK there is nothing PRU specific there. So let's not add yet
> another custom interconnect target module handling code to deal with.
>
> I also posted a patch a while back for using reset-simple with
> ti-sysc as "[PATCHv2] reset: ti-rstctrl: use the reset-simple driver".
>
Cool. I will try that out.
>> + pruss_cfg: cfg@4a326000 {
>> + compatible = "syscon";
>> + reg = <0x4a326000 0x2000>;
>> + };
>> +
>> + pruss_iep: iep@4a32e000 {
>> + compatible = "syscon";
>> + reg = <0x4a32e000 0x31c>;
>> + };
>> +
>> + pruss_mii_rt: mii_rt@4a332000 {
>> + compatible = "syscon";
>> + reg = <0x4a332000 0x58>;
>> + };
>
> Hmm what are these syscon register actually doing? Sseems like
> they should be just handled by a phy driver nowadays?
Not the PHY driver but the Ethernet driver. The PHY driver will be
a davinci-MDIO device node (not yet in this series). I should probably
add merge that with this series.
The Ethernet device tree node will reference to these syscon nodes.
e.g.
pruss2_eth {
compatible = "ti,am57-prueth";
prus = <&pru2_0>, <&pru2_1>;
firmware-name = "ti-pruss/am57xx-pru0-prueth-fw.elf",
"ti-pruss/am57xx-pru1-prueth-fw.elf";
sram = <&ocmcram1>;
interrupt-parent = <&pruss2_intc>;
--> mii-rt = <&pruss2_mii_rt>;
--> iep = <&pruss2_iep>;
}
Do you see any issues with that?
>
> Other than that the binding looks OK to me. Good to finally
> see some activity in getting the PRU support merged :)
Thanks :)
cheers,
-roger
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
