Hi Sebastian, Am Dienstag, 13. November 2018, 13:47:53 CET schrieb Heiko Stuebner: > From: Heiko Stuebner <heiko.stueb...@bq.com> > > The bq24196 is another variant of the bq24190 charger ic. > Its register set is identical to the bq24192 and it even reuses > the same part number (0x5). > > Signed-off-by: Heiko Stuebner <heiko.stueb...@bq.com>
any opinion on the underlying bq24192 and this bq24196 support? It's a month now for Brian's patches and 2 weeks for my small bq24196 addition, so it would be cool to know if there needs to be done more to get it included. Thanks Heiko > --- > This should go on top of the bq24192 support patches from Brian Masney / > Jonathan Marek [0] > > [0] https://patchwork.kernel.org/patch/10663409/ > > changes in v2: > - add missing compatible to dt-binding > > Documentation/devicetree/bindings/power/supply/bq24190.txt | 1 + > drivers/power/supply/bq24190_charger.c | 4 +++- > 2 files changed, 4 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/power/supply/bq24190.txt > b/Documentation/devicetree/bindings/power/supply/bq24190.txt > index c8ac028bd3c7..ffe2be408bb6 100644 > --- a/Documentation/devicetree/bindings/power/supply/bq24190.txt > +++ b/Documentation/devicetree/bindings/power/supply/bq24190.txt > @@ -5,6 +5,7 @@ Required properties: > * "ti,bq24190" > * "ti,bq24192" > * "ti,bq24192i" > + * "ti,bq24196" > - reg: integer, I2C address of the charger. > - interrupts[-extended]: configuration for charger INT pin. > > diff --git a/drivers/power/supply/bq24190_charger.c > b/drivers/power/supply/bq24190_charger.c > index 4e64e6ac95c5..effa7c3c21e6 100644 > --- a/drivers/power/supply/bq24190_charger.c > +++ b/drivers/power/supply/bq24190_charger.c > @@ -143,7 +143,7 @@ > #define BQ24190_REG_VPRS_PN_MASK (BIT(5) | BIT(4) | BIT(3)) > #define BQ24190_REG_VPRS_PN_SHIFT 3 > #define BQ24190_REG_VPRS_PN_24190 0x4 > -#define BQ24190_REG_VPRS_PN_24192 0x5 /* Also 24193 */ > +#define BQ24190_REG_VPRS_PN_24192 0x5 /* Also 24193, > 24196 */ > #define BQ24190_REG_VPRS_PN_24192I 0x3 > #define BQ24190_REG_VPRS_TS_PROFILE_MASK BIT(2) > #define BQ24190_REG_VPRS_TS_PROFILE_SHIFT 2 > @@ -1973,6 +1973,7 @@ static const struct i2c_device_id bq24190_i2c_ids[] = { > { "bq24190" }, > { "bq24192" }, > { "bq24192i" }, > + { "bq24196" }, > { }, > }; > MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids); > @@ -1982,6 +1983,7 @@ static const struct of_device_id bq24190_of_match[] = { > { .compatible = "ti,bq24190", }, > { .compatible = "ti,bq24192", }, > { .compatible = "ti,bq24192i", }, > + { .compatible = "ti,bq24196", }, > { }, > }; > MODULE_DEVICE_TABLE(of, bq24190_of_match); >
