On 30/11/18 4:13 PM, Du, Alek wrote: > On Fri, 30 Nov 2018 11:19:03 +0200 > Adrian Hunter <[email protected]> wrote: > >> Commands and resets are under spin lock, so no possibility for >> preemption, and certainly a few microseconds isn't going to make any >> difference to these timeouts, so I don't see how this patch could >> help. > > Thanks for your review. > > I believe my case the scheduling out delay sometime can reach 10~20 > milliseconds... This may be due to the hypervisor...
So you are saying this only happens under virtualization? > > Please look at the sdhci_enable_clk() below, there is a window in clock > stabilization check. The first check is to check status register, the > second check is to check if time passed. That's why I can capture a > case that after time passed, the actually clock control register > indicated that clock is stable. So the error handling is wrong... Sure, but "Internal clock never stabilised." is not one of the errors you listed. > > Also the sdhci_send_command commands is not in spin lock There is a > windows between mod_timer and real command send... What code path does not have a spin lock? > > Thanks, > Alek > >> >> I recently sent a patch for GLK laptops that had BIOS issues: >> >> https://marc.info/?l=linux-mmc&m=154270005901609 >> >> And also some improvements to error handling: >> >> https://marc.info/?l=linux-mmc&m=154229013900437 >> >> If those don't help, please share more details of the actual problem. > > Sorry, I can't see how this patches could fix my problem. > > > >> >>> >>> Signed-off-by: Alek Du <[email protected]> >>> --- >>> drivers/mmc/host/sdhci.c | 19 ++++++++++++++++--- >>> 1 file changed, 16 insertions(+), 3 deletions(-) >>> >>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c >>> index 99bdae53fa2e..f88c49fc574e 100644 >>> --- a/drivers/mmc/host/sdhci.c >>> +++ b/drivers/mmc/host/sdhci.c >>> @@ -218,12 +218,17 @@ void sdhci_reset(struct sdhci_host *host, u8 >>> mask) /* hw clears the bit when it's done */ >>> while (sdhci_readb(host, SDHCI_SOFTWARE_RESET) & mask) { >>> if (ktime_after(ktime_get(), timeout)) { >>> + /* check it again, since there is a window >>> between >>> + bit check and time check */ >>> + if (!(sdhci_readb(host, >>> SDHCI_SOFTWARE_RESET) & mask)) >>> + break; >>> pr_err("%s: Reset 0x%x never completed.\n", >>> mmc_hostname(host->mmc), >>> (int)mask); sdhci_dumpregs(host); >>> return; >>> + } else { >>> + udelay(10); >>> } >>> - udelay(10); >>> } >>> } >>> EXPORT_SYMBOL_GPL(sdhci_reset); >>> @@ -1395,9 +1400,10 @@ void sdhci_send_command(struct sdhci_host >>> *host, struct mmc_command *cmd) timeout += >>> DIV_ROUND_UP(cmd->busy_timeout, 1000) * HZ + HZ; else >>> timeout += 10 * HZ; >>> - sdhci_mod_timer(host, cmd->mrq, timeout); >>> >>> sdhci_writew(host, SDHCI_MAKE_CMD(cmd->opcode, flags), >>> SDHCI_COMMAND); >>> + /* setup timer after command to avoid fake timeout */ >>> + sdhci_mod_timer(host, cmd->mrq, timeout); >>> } >>> EXPORT_SYMBOL_GPL(sdhci_send_command); >>> >>> @@ -1611,12 +1617,19 @@ void sdhci_enable_clk(struct sdhci_host >>> *host, u16 clk) while (!((clk = sdhci_readw(host, >>> SDHCI_CLOCK_CONTROL)) & SDHCI_CLOCK_INT_STABLE)) { >>> if (ktime_after(ktime_get(), timeout)) { >>> + /* check it again since there is a window >>> between >>> + status check and time check */ >>> + if ((clk = sdhci_readw(host, >>> SDHCI_CLOCK_CONTROL)) >>> + & SDHCI_CLOCK_INT_STABLE) >>> + break; >>> pr_err("%s: Internal clock never >>> stabilised.\n", mmc_hostname(host->mmc)); >>> sdhci_dumpregs(host); >>> return; >>> } >>> - udelay(10); >>> + else { >>> + udelay(10); >>> + } >>> } >>> >>> clk |= SDHCI_CLOCK_CARD_EN; >>> >> > >
