On Tue 04 Dec 07:13 PST 2018, Jeffrey Hugo wrote:
> The current list of defined resets is incomplete compared to what the
> hardware implements. Enumerate the remaining resets according to the
> hardware documentation.
>
> Signed-off-by: Jeffrey Hugo <jh...@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.anders...@linaro.org>
Regards,
Bjorn
> ---
>
> Based upon "Merge branch 'clk-qcom-8998-resets' into clk-next" to hopefully
> avoid any merge conflicts.
>
> drivers/clk/qcom/gcc-msm8998.c | 87
> ++++++++++++++++++++++++++++
> include/dt-bindings/clock/qcom,gcc-msm8998.h | 87
> ++++++++++++++++++++++++++++
> 2 files changed, 174 insertions(+)
>
> diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
> index c3bb9ff..14c507d 100644
> --- a/drivers/clk/qcom/gcc-msm8998.c
> +++ b/drivers/clk/qcom/gcc-msm8998.c
> @@ -2761,6 +2761,93 @@ enum {
> [GCC_TSIF_BCR] = { 0x36000 },
> [GCC_UFS_BCR] = { 0x75000 },
> [GCC_USB_30_BCR] = { 0xf000 },
> + [GCC_SYSTEM_NOC_BCR] = { 0x4000 },
> + [GCC_CONFIG_NOC_BCR] = { 0x5000 },
> + [GCC_AHB2PHY_EAST_BCR] = { 0x7000 },
> + [GCC_IMEM_BCR] = { 0x8000 },
> + [GCC_PIMEM_BCR] = { 0xa000 },
> + [GCC_MMSS_BCR] = { 0xb000 },
> + [GCC_QDSS_BCR] = { 0xc000 },
> + [GCC_WCSS_BCR] = { 0x11000 },
> + [GCC_BLSP1_BCR] = { 0x17000 },
> + [GCC_BLSP1_UART1_BCR] = { 0x1a000 },
> + [GCC_BLSP1_UART2_BCR] = { 0x1c000 },
> + [GCC_BLSP1_UART3_BCR] = { 0x1e000 },
> + [GCC_CM_PHY_REFGEN1_BCR] = { 0x22000 },
> + [GCC_CM_PHY_REFGEN2_BCR] = { 0x24000 },
> + [GCC_BLSP2_BCR] = { 0x25000 },
> + [GCC_BLSP2_UART1_BCR] = { 0x27000 },
> + [GCC_BLSP2_UART2_BCR] = { 0x29000 },
> + [GCC_BLSP2_UART3_BCR] = { 0x2b000 },
> + [GCC_SRAM_SENSOR_BCR] = { 0x2d000 },
> + [GCC_PRNG_BCR] = { 0x34000 },
> + [GCC_TSIF_0_RESET] = { 0x36024 },
> + [GCC_TSIF_1_RESET] = { 0x36028 },
> + [GCC_TCSR_BCR] = { 0x37000 },
> + [GCC_BOOT_ROM_BCR] = { 0x38000 },
> + [GCC_MSG_RAM_BCR] = { 0x39000 },
> + [GCC_TLMM_BCR] = { 0x3a000 },
> + [GCC_MPM_BCR] = { 0x3b000 },
> + [GCC_SEC_CTRL_BCR] = { 0x3d000 },
> + [GCC_SPMI_BCR] = { 0x3f000 },
> + [GCC_SPDM_BCR] = { 0x40000 },
> + [GCC_CE1_BCR] = { 0x41000 },
> + [GCC_BIMC_BCR] = { 0x44000 },
> + [GCC_SNOC_BUS_TIMEOUT0_BCR] = { 0x49000 },
> + [GCC_SNOC_BUS_TIMEOUT1_BCR] = { 0x49008 },
> + [GCC_SNOC_BUS_TIMEOUT3_BCR] = { 0x49010 },
> + [GCC_SNOC_BUS_TIMEOUT_EXTREF_BCR] = { 0x49018 },
> + [GCC_PNOC_BUS_TIMEOUT0_BCR] = { 0x4a000 },
> + [GCC_CNOC_PERIPH_BUS_TIMEOUT1_BCR] = { 0x4a004 },
> + [GCC_CNOC_PERIPH_BUS_TIMEOUT2_BCR] = { 0x4a00c },
> + [GCC_CNOC_BUS_TIMEOUT0_BCR] = { 0x4b000 },
> + [GCC_CNOC_BUS_TIMEOUT1_BCR] = { 0x4b008 },
> + [GCC_CNOC_BUS_TIMEOUT2_BCR] = { 0x4b010 },
> + [GCC_CNOC_BUS_TIMEOUT3_BCR] = { 0x4b018 },
> + [GCC_CNOC_BUS_TIMEOUT4_BCR] = { 0x4b020 },
> + [GCC_CNOC_BUS_TIMEOUT5_BCR] = { 0x4b028 },
> + [GCC_CNOC_BUS_TIMEOUT6_BCR] = { 0x4b030 },
> + [GCC_CNOC_BUS_TIMEOUT7_BCR] = { 0x4b038 },
> + [GCC_APB2JTAG_BCR] = { 0x4c000 },
> + [GCC_RBCPR_CX_BCR] = { 0x4e000 },
> + [GCC_RBCPR_MX_BCR] = { 0x4f000 },
> + [GCC_USB3_PHY_BCR] = { 0x50020 },
> + [GCC_USB3PHY_PHY_BCR] = { 0x50024 },
> + [GCC_USB3_DP_PHY_BCR] = { 0x50028 },
> + [GCC_SSC_BCR] = { 0x63000 },
> + [GCC_SSC_RESET] = { 0x63020 },
> + [GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 },
> + [GCC_PCIE_0_LINK_DOWN_BCR] = { 0x6c014 },
> + [GCC_PCIE_0_PHY_BCR] = { 0x6c01c },
> + [GCC_PCIE_0_NOCSR_COM_PHY_BCR] = { 0x6c020 },
> + [GCC_PCIE_PHY_BCR] = { 0x6f000 },
> + [GCC_PCIE_PHY_NOCSR_COM_PHY_BCR] = { 0x6f00c },
> + [GCC_PCIE_PHY_CFG_AHB_BCR] = { 0x6f010 },
> + [GCC_PCIE_PHY_COM_BCR] = { 0x6f014 },
> + [GCC_GPU_BCR] = { 0x71000 },
> + [GCC_SPSS_BCR] = { 0x72000 },
> + [GCC_OBT_ODT_BCR] = { 0x73000 },
> + [GCC_VS_BCR] = { 0x7a000 },
> + [GCC_MSS_VS_RESET] = { 0x7a100 },
> + [GCC_GPU_VS_RESET] = { 0x7a104 },
> + [GCC_APC0_VS_RESET] = { 0x7a108 },
> + [GCC_APC1_VS_RESET] = { 0x7a10c },
> + [GCC_CNOC_BUS_TIMEOUT8_BCR] = { 0x80000 },
> + [GCC_CNOC_BUS_TIMEOUT9_BCR] = { 0x80008 },
> + [GCC_CNOC_BUS_TIMEOUT10_BCR] = { 0x80010 },
> + [GCC_CNOC_BUS_TIMEOUT11_BCR] = { 0x80018 },
> + [GCC_CNOC_BUS_TIMEOUT12_BCR] = { 0x80020 },
> + [GCC_CNOC_BUS_TIMEOUT13_BCR] = { 0x80028 },
> + [GCC_CNOC_BUS_TIMEOUT14_BCR] = { 0x80030 },
> + [GCC_CNOC_BUS_TIMEOUT_EXTREF_BCR] = { 0x80038 },
> + [GCC_AGGRE1_NOC_BCR] = { 0x82000 },
> + [GCC_AGGRE2_NOC_BCR] = { 0x83000 },
> + [GCC_DCC_BCR] = { 0x84000 },
> + [GCC_QREFS_VBG_CAL_BCR] = { 0x88028 },
> + [GCC_IPA_BCR] = { 0x89000 },
> + [GCC_GLM_BCR] = { 0x8b000 },
> + [GCC_SKL_BCR] = { 0x8c000 },
> + [GCC_MSMPU_BCR] = { 0x8d000 },
> };
>
> static const struct regmap_config gcc_msm8998_regmap_config = {
> diff --git a/include/dt-bindings/clock/qcom,gcc-msm8998.h
> b/include/dt-bindings/clock/qcom,gcc-msm8998.h
> index 58a242e..c751a40 100644
> --- a/include/dt-bindings/clock/qcom,gcc-msm8998.h
> +++ b/include/dt-bindings/clock/qcom,gcc-msm8998.h
> @@ -204,5 +204,92 @@
> #define GCC_TSIF_BCR 16
> #define GCC_UFS_BCR 17
> #define GCC_USB_30_BCR 18
> +#define GCC_SYSTEM_NOC_BCR 19
> +#define GCC_CONFIG_NOC_BCR 20
> +#define GCC_AHB2PHY_EAST_BCR 21
> +#define GCC_IMEM_BCR 22
> +#define GCC_PIMEM_BCR 23
> +#define GCC_MMSS_BCR 24
> +#define GCC_QDSS_BCR 25
> +#define GCC_WCSS_BCR 26
> +#define GCC_BLSP1_BCR 27
> +#define GCC_BLSP1_UART1_BCR 28
> +#define GCC_BLSP1_UART2_BCR 29
> +#define GCC_BLSP1_UART3_BCR 30
> +#define GCC_CM_PHY_REFGEN1_BCR 31
> +#define GCC_CM_PHY_REFGEN2_BCR 32
> +#define GCC_BLSP2_BCR 33
> +#define GCC_BLSP2_UART1_BCR 34
> +#define GCC_BLSP2_UART2_BCR 35
> +#define GCC_BLSP2_UART3_BCR 36
> +#define GCC_SRAM_SENSOR_BCR 37
> +#define GCC_PRNG_BCR 38
> +#define GCC_TSIF_0_RESET 39
> +#define GCC_TSIF_1_RESET 40
> +#define GCC_TCSR_BCR 41
> +#define GCC_BOOT_ROM_BCR 42
> +#define GCC_MSG_RAM_BCR 43
> +#define GCC_TLMM_BCR 44
> +#define GCC_MPM_BCR 45
> +#define GCC_SEC_CTRL_BCR 46
> +#define GCC_SPMI_BCR 47
> +#define GCC_SPDM_BCR 48
> +#define GCC_CE1_BCR 49
> +#define GCC_BIMC_BCR 50
> +#define GCC_SNOC_BUS_TIMEOUT0_BCR 51
> +#define GCC_SNOC_BUS_TIMEOUT1_BCR 52
> +#define GCC_SNOC_BUS_TIMEOUT3_BCR 53
> +#define GCC_SNOC_BUS_TIMEOUT_EXTREF_BCR 54
> +#define GCC_PNOC_BUS_TIMEOUT0_BCR 55
> +#define GCC_CNOC_PERIPH_BUS_TIMEOUT1_BCR 56
> +#define GCC_CNOC_PERIPH_BUS_TIMEOUT2_BCR 57
> +#define GCC_CNOC_BUS_TIMEOUT0_BCR 58
> +#define GCC_CNOC_BUS_TIMEOUT1_BCR 59
> +#define GCC_CNOC_BUS_TIMEOUT2_BCR 60
> +#define GCC_CNOC_BUS_TIMEOUT3_BCR 61
> +#define GCC_CNOC_BUS_TIMEOUT4_BCR 62
> +#define GCC_CNOC_BUS_TIMEOUT5_BCR 63
> +#define GCC_CNOC_BUS_TIMEOUT6_BCR 64
> +#define GCC_CNOC_BUS_TIMEOUT7_BCR 65
> +#define GCC_APB2JTAG_BCR 66
> +#define GCC_RBCPR_CX_BCR 67
> +#define GCC_RBCPR_MX_BCR 68
> +#define GCC_USB3_PHY_BCR 69
> +#define GCC_USB3PHY_PHY_BCR 70
> +#define GCC_USB3_DP_PHY_BCR 71
> +#define GCC_SSC_BCR 72
> +#define GCC_SSC_RESET 73
> +#define GCC_USB_PHY_CFG_AHB2PHY_BCR 74
> +#define GCC_PCIE_0_LINK_DOWN_BCR 75
> +#define GCC_PCIE_0_PHY_BCR 76
> +#define GCC_PCIE_0_NOCSR_COM_PHY_BCR 77
> +#define GCC_PCIE_PHY_BCR 78
> +#define GCC_PCIE_PHY_NOCSR_COM_PHY_BCR 79
> +#define GCC_PCIE_PHY_CFG_AHB_BCR 80
> +#define GCC_PCIE_PHY_COM_BCR 81
> +#define GCC_GPU_BCR 82
> +#define GCC_SPSS_BCR 83
> +#define GCC_OBT_ODT_BCR 84
> +#define GCC_VS_BCR 85
> +#define GCC_MSS_VS_RESET 86
> +#define GCC_GPU_VS_RESET 87
> +#define GCC_APC0_VS_RESET 88
> +#define GCC_APC1_VS_RESET 89
> +#define GCC_CNOC_BUS_TIMEOUT8_BCR 90
> +#define GCC_CNOC_BUS_TIMEOUT9_BCR 91
> +#define GCC_CNOC_BUS_TIMEOUT10_BCR 92
> +#define GCC_CNOC_BUS_TIMEOUT11_BCR 93
> +#define GCC_CNOC_BUS_TIMEOUT12_BCR 94
> +#define GCC_CNOC_BUS_TIMEOUT13_BCR 95
> +#define GCC_CNOC_BUS_TIMEOUT14_BCR 96
> +#define GCC_CNOC_BUS_TIMEOUT_EXTREF_BCR 97
> +#define GCC_AGGRE1_NOC_BCR 98
> +#define GCC_AGGRE2_NOC_BCR 99
> +#define GCC_DCC_BCR 100
> +#define GCC_QREFS_VBG_CAL_BCR 101
> +#define GCC_IPA_BCR 102
> +#define GCC_GLM_BCR 103
> +#define GCC_SKL_BCR 104
> +#define GCC_MSMPU_BCR 105
>
> #endif
> --
> Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies,
> Inc.
> Qualcomm Technologies, Inc. is a member of the
> Code Aurora Forum, a Linux Foundation Collaborative Project.
>
