From: Baruch Siach <[email protected]> The external nWDOG signal connects to the EVK board reset circuit.
Tested on the i.MX8MQ EVK rev B3. Signed-off-by: Baruch Siach <[email protected]> Signed-off-by: Lucas Stach <[email protected]> --- arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 04ce13f..64acccc 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -160,6 +160,13 @@ status = "okay"; }; +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + &iomuxc { pinctrl_fec1: fec1grp { fsl,pins = < @@ -287,4 +294,10 @@ MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1 >; }; + + pinctrl_wdog: wdog1grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; }; -- 2.7.4
