> -----Original Message-----
> From: Michael S. Tsirkin [mailto:[email protected]]
> Sent: Tuesday, December 11, 2018 10:19 AM
> To: [email protected]
> Cc: xuyandong <[email protected]>; [email protected]; Yinghai
> Lu <[email protected]>; Jesse Barnes <[email protected]>; Bjorn
> Helgaas <[email protected]>; [email protected]
> Subject: [PATCH] pci: avoid bridge feature re-probing on hotplug
> 
> commit 1f82de10d6 ("PCI/x86: don't assume prefetchable ranges are
> 64bit") added probing of bridge support for 64 bit memory each time bridge is
> re-enumerated.
> 
> Unfortunately this probing is destructive if any device behind the bridge is 
> in
> use at this time.
> 
> There's no real need to re-probe the bridge features as the regiters in 
> question
> never change - detect that using the memory flag being set and skip the
> probing.
> Avoiding repeated calls to pci_bridge_check_ranges might be even nicer would
> be a bigger patch and probably not appropriate on stable.
> 
> Reported-by: xuyandong <[email protected]>
> Cc: [email protected]
> Cc: Yinghai Lu <[email protected]>
> Cc: Jesse Barnes <[email protected]>
> Signed-off-by: Michael S. Tsirkin <[email protected]>

Tested-by: xuyandong <[email protected]>

> ---
> 
> This issue has been reported on upstream Linux and Centos.
> 
>  drivers/pci/setup-bus.c | 7 +++++++
>  1 file changed, 7 insertions(+)
> 
> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index
> ed960436df5e..7ab42f76579e 100644
> --- a/drivers/pci/setup-bus.c
> +++ b/drivers/pci/setup-bus.c
> @@ -741,6 +741,13 @@ static void pci_bridge_check_ranges(struct pci_bus
> *bus)
>       struct resource *b_res;
> 
>       b_res = &bridge->resource[PCI_BRIDGE_RESOURCES];
> +
> +     /* Don't re-check after this was called once already:
> +      * important since bridge might be in use.
> +      */
> +     if (b_res[1].flags & IORESOURCE_MEM)
> +             return;
> +
>       b_res[1].flags |= IORESOURCE_MEM;
> 
>       pci_read_config_word(bridge, PCI_IO_BASE, &io);
> --
> MST

Reply via email to