Am Donnerstag, den 13.12.2018, 10:43 +0000 schrieb Richard Zhu:
> MSI_EN of iMX PCIe RC would be asserted when
> PCIEPORTBUS driver is selected.
> Thus, the MSI works fine on iMX PCIe before.
> Assert it unconditionally when MSI is enabled.
> Otherwise, the MSI wouldn't be triggered although
> the EP is present and the MSIs are assigned.
> 
> Signed-off-by: Richard Zhu <hongxing....@nxp.com>

Reviewed-by: Lucas Stach <l.st...@pengutronix.de>

> ---
> Changes v1 -> v2:
> * Assert the MSI_EN unconditionally when MSI is supported.
> Changes v2 -> v3:
> * Remove the IS_ENABLED(CONFIG_PCI_MSI) since the driver
> depends on PCI_MSI_IRQ_DOMAIN
> * Extended with a check for pci_msi_enabled() to see
> if the user explicitly want legacy IRQs
> ---
>  drivers/pci/controller/dwc/pci-imx6.c | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c 
> b/drivers/pci/controller/dwc/pci-imx6.c
> index 26087b3..1c59a93 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -74,6 +74,7 @@ struct imx6_pcie {
> >  #define PHY_PLL_LOCK_WAIT_USLEEP_MAX       200
>  
>  /* PCIe Root Complex registers (memory-mapped) */
> > +#define PCI_MSI_CAP                                0x50
> >  #define PCIE_RC_LCR                                0x7c
> >  #define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN1   0x1
> >  #define PCIE_RC_LCR_MAX_LINK_SPEEDS_GEN2   0x2
> @@ -926,6 +927,7 @@ static int imx6_pcie_probe(struct platform_device *pdev)
> >     struct resource *dbi_base;
> >     struct device_node *node = dev->of_node;
> >     int ret;
> > +   u16 val;
>  
> >     imx6_pcie = devm_kzalloc(dev, sizeof(*imx6_pcie), GFP_KERNEL);
> >     if (!imx6_pcie)
> @@ -1071,6 +1073,12 @@ static int imx6_pcie_probe(struct platform_device 
> *pdev)
> >     if (ret < 0)
> >             return ret;
>  
> > +   if (pci_msi_enabled()) {
> > +           val = dw_pcie_readw_dbi(pci, PCI_MSI_CAP + PCI_MSI_FLAGS);
> > +           val |= PCI_MSI_FLAGS_ENABLE;
> > +           dw_pcie_writew_dbi(pci, PCI_MSI_CAP + PCI_MSI_FLAGS, val);
> > +   }
> +
> >     return 0;
>  }
>  

Reply via email to