On 20/12/2018 12:13:54+0000, Vokáč Michal wrote:
> The reset-active-low property has been removed brom the binding a while
> ago. So remove it from the examples as well.
>
> Fixes: 519b4db ("fbdev: ssd1307fb: Remove reset-active-low from the DT
> binding document")
> Reviewed-by: Rob Herring <[email protected]>
> Signed-off-by: Michal Vokáč <[email protected]>
Reviewed-by: Alexandre Belloni <[email protected]>
> ---
> Changes from v1:
> - Add R-by from Rob
>
> Documentation/devicetree/bindings/display/ssd1307fb.txt | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt
> b/Documentation/devicetree/bindings/display/ssd1307fb.txt
> index 209d931..b67f8ca 100644
> --- a/Documentation/devicetree/bindings/display/ssd1307fb.txt
> +++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt
> @@ -36,7 +36,6 @@ ssd1307: oled@3c {
> reg = <0x3c>;
> pwms = <&pwm 4 3000>;
> reset-gpios = <&gpio2 7>;
> - reset-active-low;
> };
>
> ssd1306: oled@3c {
> @@ -44,7 +43,6 @@ ssd1306: oled@3c {
> reg = <0x3c>;
> pwms = <&pwm 4 3000>;
> reset-gpios = <&gpio2 7>;
> - reset-active-low;
> solomon,com-lrremap;
> solomon,com-invdir;
> solomon,com-offset = <32>;
> --
> 2.1.4
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
