On 20/12/2018 12:13:56+0000, Vokáč Michal wrote:
> The reset signal of the SSD1306 OLED display is actually active-low.
> Adapt the DT to reflect the real world.
>
> Reviewed-by: Rob Herring <[email protected]>
> Signed-off-by: Michal Vokáč <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
> ---
> Changes from v1:
> - Add R-by from Rob
>
> arch/arm/boot/dts/imx28-cfa10036.dts | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts
> b/arch/arm/boot/dts/imx28-cfa10036.dts
> index 8337ca2..d6eca31 100644
> --- a/arch/arm/boot/dts/imx28-cfa10036.dts
> +++ b/arch/arm/boot/dts/imx28-cfa10036.dts
> @@ -11,6 +11,7 @@
>
> /dts-v1/;
> #include "imx28.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>
> / {
> model = "Crystalfontz CFA-10036 Board";
> @@ -95,7 +96,7 @@
> pinctrl-names = "default";
> pinctrl-0 = <&ssd1306_cfa10036>;
> reg = <0x3c>;
> - reset-gpios = <&gpio2 7 0>;
> + reset-gpios = <&gpio2 7
> GPIO_ACTIVE_LOW>;
> solomon,height = <32>;
> solomon,width = <128>;
> solomon,page-offset = <0>;
> --
> 2.1.4
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
