On Fri, 11 Jan 2019 15:53:59 -0500 Sebastien Bourdelin <[email protected]> wrote:
> BME680 is a pressure/temperature/humidity/voc sensor. > > Signed-off-by: Sebastien Bourdelin <[email protected]> Hmm. We could add the VDD and VDIO regulators perhaps. Driver assumes they are on currently but we'll get a board where control is needed sooner or later. I'm not that fussed about this though. Jonathan > --- > .../devicetree/bindings/iio/chemical/bme680.txt | 11 +++++++++++ > 1 file changed, 11 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/chemical/bme680.txt > > diff --git a/Documentation/devicetree/bindings/iio/chemical/bme680.txt > b/Documentation/devicetree/bindings/iio/chemical/bme680.txt > new file mode 100644 > index 000000000000..885a1b918340 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/chemical/bme680.txt > @@ -0,0 +1,11 @@ > +Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors > + > +Required properties: > +- compatible: must be "bosch,bme680" > + > +Example: > + > +bme680@77 { > + compatible = "bosch,bme680"; > + reg = <0x77>; > +};
