The driver cs4341 can be built with SPI and/or I2C, but it has to be one
of them at least. When I2C is set as a module we see the warning below:
sound/soc/codecs/cs4341.c:213:12: warning: ‘cs4341_probe’
defined but not used [-Wunused-function]
static int cs4341_probe(struct device *dev)
^~~~~~~~~~~~
Rework so that we use IS_ENABLED instead of defined. Also change so
SND_SOC_CS4341 depends on SND_SOC_I2C_AND_SPI to we dont' get a link
error when SND_SOC_CS4341=y, I2C=m and REGMAP_I2C=m is set.
Suggested-by: Arnd Bergmann <[email protected]>
Signed-off-by: Anders Roxell <[email protected]>
---
sound/soc/codecs/Kconfig | 2 +-
sound/soc/codecs/cs4341.c | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 87cb9c51e6f5..87ecb38e57f4 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -546,7 +546,7 @@ config SND_SOC_CS43130
config SND_SOC_CS4341
tristate "Cirrus Logic CS4341 CODEC"
- depends on I2C || SPI_MASTER
+ depends on SND_SOC_I2C_AND_SPI
select REGMAP_I2C if I2C
select REGMAP_SPI if SPI_MASTER
diff --git a/sound/soc/codecs/cs4341.c b/sound/soc/codecs/cs4341.c
index d2e616a89fd4..ade7477d04f1 100644
--- a/sound/soc/codecs/cs4341.c
+++ b/sound/soc/codecs/cs4341.c
@@ -223,7 +223,7 @@ static int cs4341_probe(struct device *dev)
&cs4341_dai, 1);
}
-#if defined(CONFIG_I2C)
+#if IS_ENABLED(CONFIG_I2C)
static int cs4341_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -317,7 +317,7 @@ static int __init cs4341_init(void)
{
int ret = 0;
-#if defined(CONFIG_I2C)
+#if IS_ENABLED(CONFIG_I2C)
ret = i2c_add_driver(&cs4341_i2c_driver);
if (ret)
return ret;
@@ -332,7 +332,7 @@ module_init(cs4341_init);
static void __exit cs4341_exit(void)
{
-#if defined(CONFIG_I2C)
+#if IS_ENABLED(CONFIG_I2C)
i2c_del_driver(&cs4341_i2c_driver);
#endif
#if defined(CONFIG_SPI_MASTER)
--
2.19.2
