Hi Rob. > > + > > +Optional property: > > +- quartz-load-femtofarads: The capacitive load of the quartz(x-tal), > > Probably should put this in rtc.txt so it can be shared.
Good point - will do and respin the patchset.
>
> > + expressed in femto Farad (fF). Valid values are 7000 and 12500.
> > + Default value (if no value is specified) is 7000fF.
> > +
> > +Example:
> > +
> > +pcf85063: pcf85063@51 {
>
> rtc@51
OK, will change.
Sam
