- extcon-ptn5150 driver uses gpio libraries
- Add GPIOLIB in depends section of Kconfig
Error:
-----
> CC drivers/extcon/extcon-ptn5150.o
> ../drivers/extcon/extcon-ptn5150.c: In function ‘ptn5150_irq_work’:
> ../drivers/extcon/extcon-ptn5150.c:130:5: error: implicit declaration of
> function ‘gpiod_set_value’ [-Werror=implicit-function-declaration]
> gpiod_set_value(info->vbus_gpiod, 0);
> ^
> ../drivers/extcon/extcon-ptn5150.c: In function ‘ptn5150_i2c_probe’:
> ../drivers/extcon/extcon-ptn5150.c:242:2: error: implicit declaration of
> function ‘devm_gpiod_get’ [-Werror=implicit-function-declaration]
> info->int_gpiod = devm_gpiod_get(&i2c->dev, "int", GPIOD_IN);
> ^
> ../drivers/extcon/extcon-ptn5150.c:242:53: error: ‘GPIOD_IN’ undeclared
> (first use in this function)
> info->int_gpiod = devm_gpiod_get(&i2c->dev, "int", GPIOD_IN);
> ^
> ../drivers/extcon/extcon-ptn5150.c:242:53: note: each undeclared identifier
> is reported only once for each function it appears in
> ../drivers/extcon/extcon-ptn5150.c:252:2: error: implicit declaration of
> function ‘gpiod_direction_output’ [-Werror=implicit-function-declaration]
> ret = gpiod_direction_output(info->vbus_gpiod, 0);
> ^
> ../drivers/extcon/extcon-ptn5150.c:271:3: error: implicit declaration of
> function ‘gpiod_to_irq’ [-Werror=implicit-function-declaration]
> info->irq = gpiod_to_irq(info->int_gpiod);
-----
Signed-off-by: Vijai Kumar K <vijaikumar.kanagara...@gmail.com>
---
drivers/extcon/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index b9cc027..330dd8b 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -116,7 +116,7 @@ config EXTCON_PALMAS
config EXTCON_PTN5150
tristate "NXP PTN5150 CC LOGIC USB EXTCON support"
- depends on I2C
+ depends on I2C && GPIOLIB
select REGMAP_I2C
help
Say Y here to enable support for USB peripheral and USB host
--
2.7.4
