From: Bartosz Golaszewski <[email protected]>

Add a DT binding document for max77650 ultra-low power PMIC. This
describes the core mfd device and the GPIO module.

Signed-off-by: Bartosz Golaszewski <[email protected]>
---
 .../devicetree/bindings/mfd/max77650.txt      | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/max77650.txt

diff --git a/Documentation/devicetree/bindings/mfd/max77650.txt 
b/Documentation/devicetree/bindings/mfd/max77650.txt
new file mode 100644
index 000000000000..0a40e9c6aab8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/max77650.txt
@@ -0,0 +1,47 @@
+MAX77650 ultra low-power PMIC from Maxim Integrated.
+
+Required properties:
+-------------------
+- compatible:          Must be "maxim,max77650"
+- reg:                 I2C device address.
+- interrupts:          The interrupt on the parent the controller is
+                       connected to.
+- interrupt-parent:    phandle of the parent interrupt controller.
+- interrupt-controller: Marks the device node as an interrupt controller.
+- #interrupt-cells:    Must be <2>.
+
+- gpio-controller :    Marks the device node as a gpio controller.
+- #gpio-cells :        Must be <2>. The first cell is the pin number and
+                       the second cell is used to specify the gpio active
+                       state.
+
+Optional properties:
+--------------------
+gpio-line-names:       Single string containing the name of the GPIO line.
+
+The GPIO-controller module is represented as part of the top-level PMIC
+node. The device exposes a single GPIO line.
+
+For device-tree bindings of other sub-modules (regulator, power supply,
+LEDs and onkey) refer to the binding documents under the respective
+sub-system directories.
+
+For more details on GPIO bindings, please refer to the generic GPIO DT
+binding document <devicetree/bindings/gpio/gpio.txt>.
+
+Example:
+--------
+
+       pmic: max77650@48 {
+               compatible = "maxim,max77650";
+               reg = <0x48>;
+
+               interrupt-controller;
+               interrupt-parent = <&gpio2>;
+               #interrupt-cells = <2>;
+               interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+               gpio-controller;
+               #gpio-cells = <2>;
+               gpio-line-names = "max77650-charger";
+       };
-- 
2.20.1

Reply via email to