On 14/02/2019 08:54, shun-chih...@mediatek.com wrote:
> From: Shun-Chih Yu <shun-chih...@mediatek.com>
>
> Document the devicetree bindings for MediaTek Command-Queue DMA controller
> which could be found on MT6765 SoC or other similar Mediatek SoCs.
>
> Signed-off-by: Shun-Chih Yu <shun-chih...@mediatek.com>
> Reviewed-by: Rob Herring <r...@kernel.org>
> Acked-by: Sean Wang <sean.w...@kernel.org>
> ---
Please don't send cover letters for single patches, just for series.
If you want to add some information to a single patch, which should not show up
in the commit message (e.g. change log) you can do that below the "---"
Regards,
Matthias
> .../devicetree/bindings/dma/mtk-cqdma.txt | 31
> ++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/dma/mtk-cqdma.txt
>
> diff --git a/Documentation/devicetree/bindings/dma/mtk-cqdma.txt
> b/Documentation/devicetree/bindings/dma/mtk-cqdma.txt
> new file mode 100644
> index 0000000..fb12927
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/mtk-cqdma.txt
> @@ -0,0 +1,31 @@
> +MediaTek Command-Queue DMA Controller
> +==================================
> +
> +Required properties:
> +
> +- compatible: Must be "mediatek,mt6765-cqdma" for MT6765.
> +- reg: Should contain the base address and length for each
> channel.
> +- interrupts: Should contain references to the interrupts for each
> channel.
> +- clocks: Should be the clock specifiers corresponding to the entry in
> + clock-names property.
> +- clock-names: Should contain "cqdma" entries.
> +- dma-channels: The number of DMA channels supported by the controller.
> +- dma-requests: The number of DMA request supported by the controller.
> +- #dma-cells: The length of the DMA specifier, must be <1>. This one
> cell
> + in dmas property of a client device represents the channel
> + number.
> +Example:
> +
> + cqdma: dma-controller@10212000 {
> + compatible = "mediatek,mt6765-cqdma";
> + reg = <0 0x10212000 0 0x1000>;
> + interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&infracfg CLK_IFR_CQ_DMA>;
> + clock-names = "cqdma";
> + dma-channels = <2>;
> + dma-requests = <32>;
> + #dma-cells = <1>;
> + };
> +
> +DMA clients must use the format described in dma/dma.txt file.
>
