Hi Krzysztof, On Fri, 15 Feb 2019 at 13:01, Krzysztof Kozlowski <k...@kernel.org> wrote: > > On Thu, 14 Feb 2019 at 19:35, Anand Moon <linux.am...@gmail.com> wrote: > > > > hi Krzysztof, > > > > Thanks fro your review comments. > > > > On Thu, 14 Feb 2019 at 18:11, Krzysztof Kozlowski <k...@kernel.org> wrote: > > > > > > Hi Anand, > > > > > > Thanks for the patch. See comments below. > > > > > > On Wed, 13 Feb 2019 at 22:41, Anand Moon <linux.am...@gmail.com> wrote: > > > > > > > > Add suspend-to-mem node to regulator core to be enabled or disabled > > > > during system suspend and also support changing the regulator operating > > > > mode during runtime and when the system enter sleep mode. > > > > > > > > Cc: Marek Szyprowski <m.szyprow...@samsung.com> > > > > Cc: Krzysztof Kozlowski <k...@kernel.org> > > > > Cc: Chanwoo Choi <cw00.c...@samsung.com> > > > > Signed-off-by: Anand Moon <linux.am...@gmail.com> > > > > --- > > > > > > > > Changes from previos patch > > > > [0] https://patchwork.kernel.org/patch/10712549/ > > > > > > > > Set all the WAKEUP source regulator in suspend-on state. > > > > LD04, LD012, LD015, LD020, LD022 > > > > Set all the non used regulator in suspend-odd state > > > > LD02, LD03, LD05, LD06, LD07, LD011, LD013, LDO14, LD016 > > > > > > > > BUCK5, BUCK6, BUCK7 and not confirable as per driver max77686-regulator > > > > > > > > Tested on microSD card and it resumes correcly after suspend. > > > > eMMC is not able to resume after entering into suspend state, > > > > which need to be investigated and how to debug more. > > > > --- > > > > .../boot/dts/exynos4412-odroid-common.dtsi | 63 +++++++++++++++++++ > > > > arch/arm/boot/dts/exynos4412-odroidu3.dts | 3 + > > > > 2 files changed, 66 insertions(+) > > > > > > > > diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi > > > > b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi > > > > index 08d3a0a7b4eb..e984461c37d9 100644 > > > > --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi > > > > +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi > > > > @@ -288,6 +288,9 @@ > > > > regulator-min-microvolt = <1800000>; > > > > regulator-max-microvolt = <1800000>; > > > > regulator-always-on; > > > > + regulator-state-mem { > > > > + regulator-off-in-suspend; > > > > + }; > > > > > > I see my comment from previous patch was not addressed. > > > > I left this unchanged since this regulator is not active linked and used. > > Ok I will change this to regulator-on-in-suspend, > > Why? > > Previous patch was setting this to "on". I said that this is noop and > if you want to add it, I need explanation why this regulator has to > stay on during suspend. > > So you changed to "off"... which is still noop... and you did not > provide explanation. Now you replied that you will change to "on"... > so this will be circle. Still without explanation. > ------------------------------------------------------------------------------------------------ I have added some debug prints to get more inputs.
Here is the boot logs for sdcard suspend resume [1] https://pastebin.com/wvJvJidp [root@archl-u3m ~]# rtcwake -d /dev/rtc0 -m mem -s 10 rtcwake: assuming RTC uses UTC ... rtcwake: wakeup from "mem" using /dev/rtc0 at Fri Feb 15 13:28:06 2019 [ 97.165349] PM: suspend entry (deep) [ 97.165846] PM: Syncing filesystems ... done. [ 97.344436] Freezing user space processes ... (elapsed 0.006 seconds) done. [ 97.354738] OOM killer disabled. [ 97.356028] Freezing remaining freezable tasks ... (elapsed 0.004 seconds) done. [ 97.413453] smsc95xx 1-2:1.0 eth0: entering SUSPEND2 mode [ 97.423227] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 97.444346] dwc2 12480000.hsotg: suspending usb gadget g_ether [ 97.446728] dwc2 12480000.hsotg: dwc2_hsotg_ep_disable: called for ep0 [ 97.451287] dwc2 12480000.hsotg: dwc2_hsotg_ep_disable: called for ep0 [ 97.457742] dwc2 12480000.hsotg: new device is full-speed [ 97.465766] wake enabled for irq 119 [ 97.466979] BUCK9: No configuration [ 97.470417] BUCK8_P3V3: No configuration [ 97.474131] BUCK7_2.0V: No configuration [ 97.477954] BUCK6_1.35V: No configuration [ 97.481946] VDDQ_CKEM1_2_1.2V: No configuration [ 97.487930] BUCK4: regulator suspend disable supported [ 97.491964] BUCK3: regulator suspend disable supported [ 97.497184] BUCK1: regulator suspend disable supported [ 97.501838] LDO26: No configuration [ 97.505383] LDO24: No configuration [ 97.508761] LDO23: No configuration [ 97.512368] LDO19: No configuration [ 97.515706] LDO18: No configuration [ 97.519178] LDO17: No configuration [ 97.523076] LDO16: regulator suspend disable supported [ 97.528154] LDO15: regulator suspend disable supported [ 97.533367] LDO14: regulator suspend disable supported [ 97.538447] LDO12: regulator suspend disable supported [ 97.543603] LDO11: regulator suspend disable supported [ 97.548308] LDO9: No configuration [ 97.552107] LDO7: regulator suspend disable supported [ 97.557064] LDO6: regulator suspend disable supported [ 97.562251] LDO2: regulator suspend disable supported [ 97.566769] VDD_ALIVE_1.0V: No configuration [ 97.581717] usb3503 0-0008: switched to STANDBY mode [ 97.582496] wake enabled for irq 123 [ 97.602770] samsung-pinctrl 11000000.pinctrl: Setting external wakeup interrupt mask: 0xfbfff7ff [ 97.623616] Disabling non-boot CPUs ... [ 97.681453] s3c2410-wdt 10060000.watchdog: watchdog disabled [ 97.681743] wake disabled for irq 123 [ 97.692569] usb3503 0-0008: switched to HUB mode [ 97.801553] wake disabled for irq 119 [ 97.802087] dwc2 12480000.hsotg: resuming usb gadget g_ether [ 98.080458] usb 1-2: reset high-speed USB device number 2 using exynos-ehci [ 98.432321] usb 1-3: reset high-speed USB device number 3 using exynos-ehci [ 98.970441] usb 1-3.3: reset high-speed USB device number 4 using exynos-ehci [ 99.135835] OOM killer enabled. [ 99.135940] Restarting tasks ... done. [ 99.140760] PM: suspend exit [root@archl-u3m ~]# [ 99.877843] smsc95xx 1-2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1 ------------------------------------------------ Here is the boot log for emmc suspend resume. after disable of emmc regulator. [2] https://pastebin.com/Z05K3kj2 rtcwake: wakeup from "mem" using /dev/rtc0 at Fri Feb 15 13:27:26 2019 [ 79.775108] PM: suspend entry (deep) [ 79.775462] PM: Syncing filesystems ... done. [ 79.819009] Freezing user space processes ... (elapsed 0.004 seconds) done. [ 79.826300] OOM killer disabled. [ 79.828603] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 79.875967] smsc95xx 1-2:1.0 eth0: entering SUSPEND2 mode [ 79.959495] dwc2 12480000.hsotg: suspending usb gadget g_ether [ 79.960480] dwc2 12480000.hsotg: dwc2_hsotg_ep_disable: called for ep0 [ 79.966431] dwc2 12480000.hsotg: new device is full-speed [ 79.971805] dwc2 12480000.hsotg: dwc2_hsotg_ep_disable: called for ep0 [ 79.980568] wake enabled for irq 119 [ 79.982195] BUCK9: No configuration [ 79.985540] BUCK8_P3V3: No configuration [ 79.989201] BUCK7_2.0V: No configuration [ 79.993175] BUCK6_1.35V: No configuration [ 79.997099] VDDQ_CKEM1_2_1.2V: No configuration [ 80.002765] BUCK4: regulator suspend disable supported [ 80.007115] BUCK3: regulator suspend disable supported [ 80.012346] BUCK1: regulator suspend disable supported [ 80.016991] LDO26: No configuration [ 80.020467] LDO24: No configuration [ 80.023991] LDO23: No configuration [ 80.027456] LDO19: No configuration [ 80.030858] LDO18: No configuration [ 80.034388] LDO17: No configuration [ 80.038172] LDO16: regulator suspend disable supported [ 80.043410] LDO15: regulator suspend disable supported [ 80.048429] LDO14: regulator suspend disable supported [ 80.053658] LDO12: regulator suspend disable supported [ 80.058670] LDO11: regulator suspend disable supported [ 80.063522] LDO9: No configuration [ 80.067187] LDO7: regulator suspend disable supported [ 80.072290] LDO6: regulator suspend disable supported [ 80.077321] LDO2: regulator suspend disable supported [ 80.081995] VDD_ALIVE_1.0V: No configuration [ 80.096885] usb3503 0-0008: switched to STANDBY mode [ 80.097568] wake enabled for irq 123 [ 80.116002] samsung-pinctrl 11000000.pinctrl: Setting external wakeup interrupt mask: 0xfbfff7ff [ 80.134695] Disabling non-boot CPUs ... [snip] > > > > diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts > > > > b/arch/arm/boot/dts/exynos4412-odroidu3.dts > > > > index 2bdf899df436..4ebde09fc51d 100644 > > > > --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts > > > > +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts > > > > @@ -82,6 +82,9 @@ > > > > regulator-name = "LDO22_VDDQ_MMC4_2.8V"; > > > > regulator-min-microvolt = <2800000>; > > > > regulator-max-microvolt = <2800000>; > > > > + regulator-state-mem { > > > > + regulator-on-in-suspend; > > > > > > Why? > > > > > > > I chose not to disable mshc_0 (emmc) regulator, > > since I could not get suspend resume working on eMMC. > > Having "regulator-on-in-suspend" is not the same as not disabling > regulator during suspend. This property means you will explicitly > enable it during suspend. To me it looks wrong so I would be happy to > see explanations. > During suspend the driver set the regulator in standby mode until resume. Opps I understood the regulator in suspend mode enter into REGULATOR_MODE_STANDBY : MAX77686_OFF_PWRREQ; [ 79.997099] VDDQ_CKEM1_2_1.2V: No configuration [ 80.002765] BUCK4: regulator suspend disable supported [ 80.007115] BUCK3: regulator suspend disable supported [ 80.012346] BUCK1: regulator suspend disable supported [ 80.016991] LDO26: No configuration [ 80.020467] LDO24: No configuration [ 80.023991] LDO23: No configuration [ 80.027456] LDO19: No configuration [ 80.030858] LDO18: No configuration [ 80.034388] LDO17: No configuration [ 80.038172] LDO16: regulator suspend disable supported [ 80.043410] LDO15: regulator suspend disable supported [ 80.048429] LDO14: regulator suspend disable supported [ 80.053658] LDO12: regulator suspend disable supported [ 80.058670] LDO11: regulator suspend disable supported [ 80.063522] LDO9: No configuration [ 80.067187] LDO7: regulator suspend disable supported [ 80.072290] LDO6: regulator suspend disable supported [ 80.077321] LDO2: regulator suspend disable supported So as per the logs BUCK1 / BUCK3 / BUCK4 successfully entered into suspend mode. Where as suspend is disabled in groups as per the documentation. (Group 1) Buck6-->Buck7-->LD01-->LD011-->LD014 Group 2) Buck2-->Buck1-->Buck3-->Buck4 Group 3> LD06-->LD013-->LD08-->LD015-->LD010-->LD016-->LD05-->LD012 Best Regards -Anand
