From: Codrin Ciubotariu <codrin.ciubota...@microchip.com>

The ADCs are sleeping when the SLEEP bit is set and running when it's
cleared, so the bit should be inverted.
Tested on pcm1863.

Signed-off-by: Codrin Ciubotariu <codrin.ciubota...@microchip.com>
---

Changes in v2:
 - none;

 sound/soc/codecs/pcm186x.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/pcm186x.c b/sound/soc/codecs/pcm186x.c
index c36a391fec8a..c5fcc632f670 100644
--- a/sound/soc/codecs/pcm186x.c
+++ b/sound/soc/codecs/pcm186x.c
@@ -158,7 +158,7 @@ static const struct snd_soc_dapm_widget 
pcm1863_dapm_widgets[] = {
         * Put the codec into SLEEP mode when not in use, allowing the
         * Energysense mechanism to operate.
         */
-       SND_SOC_DAPM_ADC("ADC", "HiFi Capture", PCM186X_POWER_CTRL, 1,  0),
+       SND_SOC_DAPM_ADC("ADC", "HiFi Capture", PCM186X_POWER_CTRL, 1,  1),
 };
 
 static const struct snd_soc_dapm_widget pcm1865_dapm_widgets[] = {
@@ -184,8 +184,8 @@ static const struct snd_soc_dapm_widget 
pcm1865_dapm_widgets[] = {
         * Put the codec into SLEEP mode when not in use, allowing the
         * Energysense mechanism to operate.
         */
-       SND_SOC_DAPM_ADC("ADC1", "HiFi Capture 1", PCM186X_POWER_CTRL, 1,  0),
-       SND_SOC_DAPM_ADC("ADC2", "HiFi Capture 2", PCM186X_POWER_CTRL, 1,  0),
+       SND_SOC_DAPM_ADC("ADC1", "HiFi Capture 1", PCM186X_POWER_CTRL, 1,  1),
+       SND_SOC_DAPM_ADC("ADC2", "HiFi Capture 2", PCM186X_POWER_CTRL, 1,  1),
 };
 
 static const struct snd_soc_dapm_route pcm1863_dapm_routes[] = {
-- 
2.17.1

Reply via email to