>
>On 20/02/2019 13:18, Pawel Laszczak wrote:
>> Hi Roger.
>>>
>>> On 14/02/2019 21:45, Pawel Laszczak wrote:
>>>> Controller for OUT endpoints has shared on-chip buffers for all incoming
>>>> packets, including ep0out. It's FIFO buffer, so packets must be handle
>>>> by DMA in correct order. If the first packet in the buffer will not be
>>>> handled, then the following packets directed for other endpoints and
>>>> functions will be blocked.
>>>>
>>>> Additionally the packets directed to one endpoint can block entire on-chip
>>>> buffers. In this case transfer to other endpoints also will blocked.
>>>>
>>>> To resolve this issue after raising the descriptor missing interrupt
>>>> driver prepares internal usb_request object and use it to arm DMA
>>>> transfer.
>>>>
>>>> The problematic situation was observed in case when endpoint has
>>>> been enabled but no usb_request were queued. Driver try detects
>>>> such endpoints and will use this workaround only for these endpoint.
>>>>
>>>> Driver use limited number of buffer. This number can be set by macro
>>>> CDNS_WA2_NUM_BUFFERS.
>>>>
>>>> Such blocking situation was observed on ACM gadget. For this function
>>>> host send OUT data packet but ACM function is not prepared for
>>>> this packet. It's cause that buffer placed in on chip memory block
>>>> transfer to other endpoints.
>>>>
>>>> It's limitation of controller but maybe this issues should be fixed in
>>>> function driver.
>>>>
>>>> This work around can be disabled/enabled by means of quirk_internal_buffer
>>>> module parameter. By default feature is enabled. It can has impact to
>>>> transfer performance and in most case this feature can be disabled.
>>>
>>> How much is the performance impact?
>>
>> I didn't check this, but performance will be decreased because driver has to
>> copy data from internally allocated buffer to usb_request->buff.
>>
>>> You mentioned that the issue was observed only in the ACM case and
>>> could be fixed in the function driver?
>>> It seems pointless to enable an endpoint and not have any requests queued 
>>> for it.
>>
>> Yes, it’s true. The request in ACM class is send to Controller Driver when 
>> user read file associated
>> with ACM gadget. Problem exist because host send data to controller but USB 
>> controller
>> has not prepared buffer for this data by ACM class.
>>
>>> Isn't fixing the ACM driver (if there is a real issue) a better approach 
>>> than having
>>> a workaround that affects performance of all other use cases?
>>
>> Yes it should be better. But what ACM driver should do with unexpected data. 
>> I'm not sure if we
>> can simply delete them.
>>
>> The best solution would be to make modification in controller. In such case 
>> Controller shouldn't accept
>> packet but should send NAK.
>
>Yes, that should be standard behaviour. No?
>
>>
>> One more thing. Workaround has implemented algorithm that decide for which 
>> endpoint it should be enabled.
>> e.g for composite device MSC+NCM+ACM it should work only for ACM OUT 
>> endpoint.
>>
>
>If ACM driver didn't queue the request for ACM OUT endpoint, why does the 
>controller accept the data at all?
>I didn't understand why we need a workaround for this. It should be standard 
>behaviour to NAK data if
>function driver didn't request for all endpoints.

Yes, I agree with you. Controller shouldn’t accept such packet. As I know this 
behavior will be fixed in RTL. 
But I assume that some older version of this controller are one the market, and 
driver should work correct with them.
In the feature this workaround can be limited only to selected controllers. 
Even now I assume that it can be enabled/disabled by module parameter. 

>
>Also I didn't understand why performance should be impacted to just NAK data.

Data waiting in on-chip buffers can be very fast copied to system memory when 
DMA will be armed.
In same case this feature can little increase performance, but it makes many 
problems under OS.

Cheers,
Pawel


>cheers,
>-roger
>
>> Cheers,
>> Pawel
>>>
>>>>
>>>> Signed-off-by: Pawel Laszczak <paw...@cadence.com>
>>>> ---
>>>>  drivers/usb/cdns3/gadget.c | 273 ++++++++++++++++++++++++++++++++++++-
>>>>  drivers/usb/cdns3/gadget.h |   7 +
>>>>  2 files changed, 278 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
>>>> index 7f7f24ee3c4b..5dfbe6e1421c 100644
>>>> --- a/drivers/usb/cdns3/gadget.c
>>>> +++ b/drivers/usb/cdns3/gadget.c
>>>> @@ -27,6 +27,37 @@
>>>>   * If (((Dequeue Ptr (i.e. EP_TRADDR) == Enqueue Ptr-1) or
>>>>   *        (Dequeue Ptr (i.e. EP_TRADDR) == Enqueue Ptr))
>>>>   *                and (DRBL==1 and (not EP0)))
>>>> + *
>>>> + * Work around 2:
>>>> + * Controller for OUT endpoints has shared on-chip buffers for all 
>>>> incoming
>>>> + * packets, including ep0out. It's FIFO buffer, so packets must be handle 
>>>> by DMA
>>>> + * in correct order. If the first packet in the buffer will not be 
>>>> handled,
>>>> + * then the following packets directed for other endpoints and  functions
>>>> + * will be blocked.
>>>> + * Additionally the packets directed to one endpoint can block entire 
>>>> on-chip
>>>> + * buffers. In this case transfer to other endpoints also will blocked.
>>>> + *
>>>> + * To resolve this issue after raising the descriptor missing interrupt
>>>> + * driver prepares internal usb_request object and use it to arm DMA 
>>>> transfer.
>>>> + *
>>>> + * The problematic situation was observed in case when endpoint has been 
>>>> enabled
>>>> + * but no usb_request were queued. Driver try detects such endpoints and 
>>>> will
>>>> + * use this workaround only for these endpoint.
>>>> + *
>>>> + * Driver use limited number of buffer. This number can be set by macro
>>>> + * CDNS_WA2_NUM_BUFFERS.
>>>> + *
>>>> + * Such blocking situation was observed on ACM gadget. For this function
>>>> + * host send OUT data packet but ACM function is not prepared for this 
>>>> packet.
>>>> + * It's cause that buffer placed in on chip memory block transfer to other
>>>> + * endpoints.
>>>> + *
>>>> + * It's limitation of controller but maybe this issues should be fixed in
>>>> + * function driver.
>>>> + *
>>>> + * This work around can be disabled/enabled by means of 
>>>> quirk_internal_buffer
>>>> + * module parameter. By default feature is enabled. It can has impact to
>>>> + * transfer performance and in most case this feature can be disabled.
>>>>   */
>>>>
>>>>  #include <linux/dma-mapping.h>
>>>> @@ -42,6 +73,14 @@ static int __cdns3_gadget_ep_queue(struct usb_ep *ep,
>>>>                               struct usb_request *request,
>>>>                               gfp_t gfp_flags);
>>>>
>>>> +/*
>>>> + * Parameter allows to disable/enable handling of work around 2 feature.
>>>> + * By default this value is enabled.
>>>> + */
>>>> +static bool quirk_internal_buffer = 1;
>>>> +module_param(quirk_internal_buffer, bool, 0644);
>>>> +MODULE_PARM_DESC(quirk_internal_buffer, "Disable/enable WA2 algorithm");
>>>> +
>>>>  /**
>>>>   * cdns3_handshake - spin reading  until handshake completes or fails
>>>>   * @ptr: address of device controller register to be read
>>>> @@ -105,6 +144,17 @@ struct usb_request *cdns3_next_request(struct 
>>>> list_head *list)
>>>>    return list_first_entry_or_null(list, struct usb_request, list);
>>>>  }
>>>>
>>>> +/**
>>>> + * cdns3_next_priv_request - returns next request from list
>>>> + * @list: list containing requests
>>>> + *
>>>> + * Returns request or NULL if no requests in list
>>>> + */
>>>> +struct cdns3_request *cdns3_next_priv_request(struct list_head *list)
>>>> +{
>>>> +  return list_first_entry_or_null(list, struct cdns3_request, list);
>>>> +}
>>>> +
>>>>  /**
>>>>   * select_ep - selects endpoint
>>>>   * @priv_dev:  extended gadget object
>>>> @@ -384,6 +434,53 @@ static int cdns3_start_all_request(struct 
>>>> cdns3_device *priv_dev,
>>>>    return ret;
>>>>  }
>>>>
>>>> +/**
>>>> + * cdns3_descmiss_copy_data copy data from internal requests to request 
>>>> queued
>>>> + * by class driver.
>>>> + * @priv_ep: extended endpoint object
>>>> + * @request: request object
>>>> + */
>>>> +static void cdns3_descmiss_copy_data(struct cdns3_endpoint *priv_ep,
>>>> +                               struct usb_request *request)
>>>> +{
>>>> +  struct usb_request *descmiss_req;
>>>> +  struct cdns3_request *descmiss_priv_req;
>>>> +
>>>> +  while (!list_empty(&priv_ep->descmiss_req_list)) {
>>>> +          int chunk_end;
>>>> +          int length;
>>>> +
>>>> +          descmiss_priv_req =
>>>> +                  cdns3_next_priv_request(&priv_ep->descmiss_req_list);
>>>> +          descmiss_req = &descmiss_priv_req->request;
>>>> +
>>>> +          /* driver can't touch pending request */
>>>> +          if (descmiss_priv_req->flags & REQUEST_PENDING)
>>>> +                  break;
>>>> +
>>>> +          chunk_end = descmiss_priv_req->flags & REQUEST_INTERNAL_CH;
>>>> +          length = request->actual + descmiss_req->actual;
>>>> +
>>>> +          if (length <= request->length) {
>>>> +                  memcpy(&((u8 *)request->buf)[request->actual],
>>>> +                         descmiss_req->buf,
>>>> +                         descmiss_req->actual);
>>>> +                  request->actual = length;
>>>> +          } else {
>>>> +                  /* It should never occures */
>>>> +                  request->status = -ENOMEM;
>>>> +          }
>>>> +
>>>> +          list_del_init(&descmiss_priv_req->list);
>>>> +
>>>> +          kfree(descmiss_req->buf);
>>>> +          cdns3_gadget_ep_free_request(&priv_ep->endpoint, descmiss_req);
>>>> +
>>>> +          if (!chunk_end)
>>>> +                  break;
>>>> +  }
>>>> +}
>>>> +
>>>>  /**
>>>>   * cdns3_gadget_giveback - call struct usb_request's ->complete callback
>>>>   * @priv_ep: The endpoint to whom the request belongs to
>>>> @@ -412,6 +509,32 @@ void cdns3_gadget_giveback(struct cdns3_endpoint 
>>>> *priv_ep,
>>>>    priv_req->flags &= ~REQUEST_PENDING;
>>>>    trace_cdns3_gadget_giveback(priv_req);
>>>>
>>>> +  /* WA2: */
>>>> +  if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN &&
>>>> +      priv_req->flags & REQUEST_INTERNAL) {
>>>> +          struct usb_request *req;
>>>> +
>>>> +          req = cdns3_next_request(&priv_ep->deferred_req_list);
>>>> +          request = req;
>>>> +          priv_ep->descmis_req = NULL;
>>>> +
>>>> +          if (!req)
>>>> +                  return;
>>>> +
>>>> +          cdns3_descmiss_copy_data(priv_ep, req);
>>>> +          if (!(priv_ep->flags & EP_QUIRK_END_TRANSFER) &&
>>>> +              req->length != req->actual) {
>>>> +                  /* wait for next part of transfer */
>>>> +                  return;
>>>> +          }
>>>> +
>>>> +          if (req->status == -EINPROGRESS)
>>>> +                  req->status = 0;
>>>> +
>>>> +          list_del_init(&req->list);
>>>> +          cdns3_start_all_request(priv_dev, priv_ep);
>>>> +  }
>>>> +
>>>>    /* Start all not pending request */
>>>>    if (priv_ep->flags & EP_RING_FULL)
>>>>            cdns3_start_all_request(priv_dev, priv_ep);
>>>> @@ -774,6 +897,59 @@ void cdns3_rearm_transfer(struct cdns3_endpoint 
>>>> *priv_ep, u8 rearm)
>>>>    }
>>>>  }
>>>>
>>>> +/**
>>>> + * cdns3_descmissing_packet - handles descriptor missing event.
>>>> + * @priv_dev: extended gadget object
>>>> + *
>>>> + * This function is used only for WA2. For more information see Work 
>>>> around 2
>>>> + * description.
>>>> + */
>>>> +static int cdns3_descmissing_packet(struct cdns3_endpoint *priv_ep)
>>>> +{
>>>> +  struct cdns3_request *priv_req;
>>>> +  struct usb_request *request;
>>>> +
>>>> +  if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) {
>>>> +          priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET;
>>>> +          priv_ep->flags |= EP_QUIRK_EXTRA_BUF_EN;
>>>> +  }
>>>> +
>>>> +  cdns3_dbg(priv_ep->cdns3_dev, "WA2: Description Missing detected\n");
>>>> +
>>>> +  request = cdns3_gadget_ep_alloc_request(&priv_ep->endpoint,
>>>> +                                          GFP_ATOMIC);
>>>> +  if (!request)
>>>> +          return -ENOMEM;
>>>> +
>>>> +  priv_req = to_cdns3_request(request);
>>>> +  priv_req->flags |= REQUEST_INTERNAL;
>>>> +
>>>> +  /* if this field is still assigned it indicate that transfer related
>>>> +   * with this request has not been finished yet. Driver in this
>>>> +   * case simply allocate next request and assign flag REQUEST_INTERNAL_CH
>>>> +   * flag to previous one. It will indicate that current request is
>>>> +   * part of the previous one.
>>>> +   */
>>>> +  if (priv_ep->descmis_req)
>>>> +          priv_ep->descmis_req->flags |= REQUEST_INTERNAL_CH;
>>>> +
>>>> +  priv_req->request.buf = kzalloc(CDNS3_DESCMIS_BUF_SIZE,
>>>> +                                  GFP_ATOMIC);
>>>> +  if (!priv_req) {
>>>> +          cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
>>>> +          return -ENOMEM;
>>>> +  }
>>>> +
>>>> +  priv_req->request.length = CDNS3_DESCMIS_BUF_SIZE;
>>>> +  priv_ep->descmis_req = priv_req;
>>>> +
>>>> +  __cdns3_gadget_ep_queue(&priv_ep->endpoint,
>>>> +                          &priv_ep->descmis_req->request,
>>>> +                          GFP_ATOMIC);
>>>> +
>>>> +  return 0;
>>>> +}
>>>> +
>>>>  /**
>>>>   * cdns3_check_ep_interrupt_proceed - Processes interrupt related to 
>>>> endpoint
>>>>   * @priv_ep: endpoint object
>>>> @@ -807,8 +983,31 @@ static int cdns3_check_ep_interrupt_proceed(struct 
>>>> cdns3_endpoint *priv_ep)
>>>>                    cdns3_rearm_transfer(priv_ep, priv_ep->wa1_set);
>>>>    }
>>>>
>>>> -  if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP))
>>>> +  if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) {
>>>> +          if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) {
>>>> +                  if (ep_sts_reg & EP_STS_ISP)
>>>> +                          priv_ep->flags |= EP_QUIRK_END_TRANSFER;
>>>> +                  else
>>>> +                          priv_ep->flags &= ~EP_QUIRK_END_TRANSFER;
>>>> +          }
>>>> +
>>>>            cdns3_transfer_completed(priv_dev, priv_ep);
>>>> +  }
>>>> +
>>>> +  /*
>>>> +   * WA2: this condition should only be meet when
>>>> +   * priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET or
>>>> +   * priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN.
>>>> +   * In other cases this interrupt will be disabled/
>>>> +   */
>>>> +  if (ep_sts_reg & EP_STS_DESCMIS) {
>>>> +          int err;
>>>> +
>>>> +          err = cdns3_descmissing_packet(priv_ep);
>>>> +          if (err)
>>>> +                  dev_err(priv_dev->dev,
>>>> +                          "Failed: No sufficient memory for DESCMIS\n");
>>>> +  }
>>>>
>>>>    return 0;
>>>>  }
>>>> @@ -1241,13 +1440,26 @@ static int cdns3_gadget_ep_enable(struct usb_ep 
>>>> *ep,
>>>>    /* enable interrupt for selected endpoint */
>>>>    cdns3_set_register_bit(&priv_dev->regs->ep_ien,
>>>>                           BIT(cdns3_ep_addr_to_index(bEndpointAddress)));
>>>> +  /*
>>>> +   * WA2: Set flag for all not ISOC OUT endpoints. If this flag is set
>>>> +   * driver try to detect whether endpoint need additional internal
>>>> +   * buffer for unblocking on-chip FIFO buffer. This flag will be cleared
>>>> +   * if before first DESCMISS interrupt the DMA will be armed.
>>>> +   */
>>>> +  if (quirk_internal_buffer) {
>>>> +          if (!priv_ep->dir && priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
>>>> +                  priv_ep->flags |= EP_QUIRK_EXTRA_BUF_DET;
>>>> +                  reg |= EP_STS_EN_DESCMISEN;
>>>> +          }
>>>> +  }
>>>>
>>>>    writel(reg, &priv_dev->regs->ep_sts_en);
>>>>
>>>>    cdns3_set_register_bit(&priv_dev->regs->ep_cfg, EP_CFG_ENABLE);
>>>>
>>>>    ep->desc = desc;
>>>> -  priv_ep->flags &= ~(EP_PENDING_REQUEST | EP_STALL);
>>>> +  priv_ep->flags &= ~(EP_PENDING_REQUEST | EP_STALL |
>>>> +                      EP_QUIRK_EXTRA_BUF_EN);
>>>>    priv_ep->flags |= EP_ENABLED | EP_UPDATE_EP_TRBADDR;
>>>>    priv_ep->wa1_set = 0;
>>>>    priv_ep->enqueue = 0;
>>>> @@ -1272,6 +1484,7 @@ static int cdns3_gadget_ep_enable(struct usb_ep *ep,
>>>>  static int cdns3_gadget_ep_disable(struct usb_ep *ep)
>>>>  {
>>>>    struct cdns3_endpoint *priv_ep;
>>>> +  struct cdns3_request *priv_req;
>>>>    struct cdns3_device *priv_dev;
>>>>    struct usb_request *request;
>>>>    unsigned long flags;
>>>> @@ -1308,6 +1521,14 @@ static int cdns3_gadget_ep_disable(struct usb_ep 
>>>> *ep)
>>>>                                  -ESHUTDOWN);
>>>>    }
>>>>
>>>> +  while (!list_empty(&priv_ep->descmiss_req_list)) {
>>>> +          priv_req = cdns3_next_priv_request(&priv_ep->descmiss_req_list);
>>>> +
>>>> +          kfree(priv_req->request.buf);
>>>> +          cdns3_gadget_ep_free_request(&priv_ep->endpoint,
>>>> +                                       &priv_req->request);
>>>> +  }
>>>> +
>>>>    while (!list_empty(&priv_ep->deferred_req_list)) {
>>>>            request = cdns3_next_request(&priv_ep->deferred_req_list);
>>>>
>>>> @@ -1348,6 +1569,53 @@ static int __cdns3_gadget_ep_queue(struct usb_ep 
>>>> *ep,
>>>>    priv_req = to_cdns3_request(request);
>>>>    trace_cdns3_ep_queue(priv_req);
>>>>
>>>> +  /*
>>>> +   * WA2: if transfer was queued before DESCMISS appear than we
>>>> +   * can disable handling of DESCMISS interrupt. Driver assumes that it
>>>> +   * can disable special treatment for this endpoint.
>>>> +   */
>>>> +  if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) {
>>>> +          u32 reg;
>>>> +
>>>> +          cdns3_select_ep(priv_dev, priv_ep->num | priv_ep->dir);
>>>> +          priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET;
>>>> +          reg = readl(&priv_dev->regs->ep_sts_en);
>>>> +          reg &= ~EP_STS_EN_DESCMISEN;
>>>> +          writel(reg, &priv_dev->regs->ep_sts_en);
>>>> +  }
>>>> +
>>>> +  /* WA2 */
>>>> +  if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) {
>>>> +          u8 pending_empty = list_empty(&priv_ep->pending_req_list);
>>>> +          u8 descmiss_empty = list_empty(&priv_ep->descmiss_req_list);
>>>> +
>>>> +          /*
>>>> +           *  DESCMISS transfer has been finished, so data will be
>>>> +           *  directly copied from internal allocated usb_request
>>>> +           *  objects.
>>>> +           */
>>>> +          if (pending_empty && !descmiss_empty &&
>>>> +              !(priv_req->flags & REQUEST_INTERNAL)) {
>>>> +                  cdns3_descmiss_copy_data(priv_ep, request);
>>>> +                  list_add_tail(&request->list,
>>>> +                                &priv_ep->pending_req_list);
>>>> +                  cdns3_gadget_giveback(priv_ep, priv_req,
>>>> +                                        request->status);
>>>> +                  return ret;
>>>> +          }
>>>> +
>>>> +          /*
>>>> +           * WA2 driver will wait for completion DESCMISS transfer,
>>>> +           * before starts new, not DESCMISS transfer.
>>>> +           */
>>>> +          if (!pending_empty && !descmiss_empty)
>>>> +                  deferred = 1;
>>>> +
>>>> +          if (priv_req->flags & REQUEST_INTERNAL)
>>>> +                  list_add_tail(&priv_req->list,
>>>> +                                &priv_ep->descmiss_req_list);
>>>> +  }
>>>> +
>>>>    ret = usb_gadget_map_request_by_dev(priv_dev->sysdev, request,
>>>>                                        usb_endpoint_dir_in(ep->desc));
>>>>    if (ret)
>>>> @@ -1782,6 +2050,7 @@ static int cdns3_init_eps(struct cdns3_device 
>>>> *priv_dev)
>>>>
>>>>            INIT_LIST_HEAD(&priv_ep->pending_req_list);
>>>>            INIT_LIST_HEAD(&priv_ep->deferred_req_list);
>>>> +          INIT_LIST_HEAD(&priv_ep->descmiss_req_list);
>>>>    }
>>>>
>>>>    return 0;
>>>> diff --git a/drivers/usb/cdns3/gadget.h b/drivers/usb/cdns3/gadget.h
>>>> index 817f8ae7a4da..8de733b315e9 100644
>>>> --- a/drivers/usb/cdns3/gadget.h
>>>> +++ b/drivers/usb/cdns3/gadget.h
>>>> @@ -1000,6 +1000,7 @@ struct cdns3_device;
>>>>   * @endpoint: usb endpoint
>>>>   * @pending_req_list: list of requests queuing on transfer ring.
>>>>   * @deferred_req_list: list of requests waiting for queuing on transfer 
>>>> ring.
>>>> + * @descmiss_req_list: list of requests internally allocated by driver 
>>>> (WA2).
>>>>   * @trb_pool: transfer ring - array of transaction buffers
>>>>   * @trb_pool_dma: dma address of transfer ring
>>>>   * @cdns3_dev: device associated with this endpoint
>>>> @@ -1026,6 +1027,7 @@ struct cdns3_endpoint {
>>>>    struct usb_ep           endpoint;
>>>>    struct list_head        pending_req_list;
>>>>    struct list_head        deferred_req_list;
>>>> +  struct list_head        descmiss_req_list;
>>>>
>>>>    struct cdns3_trb        *trb_pool;
>>>>    dma_addr_t              trb_pool_dma;
>>>> @@ -1041,6 +1043,9 @@ struct cdns3_endpoint {
>>>>  #define EP_PENDING_REQUEST        BIT(5)
>>>>  #define EP_RING_FULL              BIT(6)
>>>>  #define EP_CLAIMED                BIT(7)
>>>> +#define EP_QUIRK_EXTRA_BUF_DET    BIT(8)
>>>> +#define EP_QUIRK_EXTRA_BUF_EN     BIT(9)
>>>> +#define EP_QUIRK_END_TRANSFER     BIT(10)
>>>>
>>>>    u32                     flags;
>>>>
>>>> @@ -1074,6 +1079,7 @@ struct cdns3_endpoint {
>>>>   * @start_trb: number of the first TRB in transfer ring
>>>>   * @end_trb: number of the last TRB in transfer ring
>>>>   * @flags: flag specifying special usage of request
>>>> + * @list: used by internally allocated request to add to 
>>>> descmiss_req_list.
>>>>   */
>>>>  struct cdns3_request {
>>>>    struct usb_request      request;
>>>> @@ -1086,6 +1092,7 @@ struct cdns3_request {
>>>>  #define REQUEST_INTERNAL_CH       BIT(2)
>>>>  #define REQUEST_ZLP               BIT(3)
>>>>    u32                     flags;
>>>> +  struct list_head        list;
>>>>  };
>>>>
>>>>  #define to_cdns3_request(r) (container_of(r, struct cdns3_request, 
>>>> request))
>>>>
>>>
>>> --
>>> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
>>> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>
>--
>Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
>Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

Reply via email to