Am 24.02.19 um 17:22 schrieb Andreas Klinger: > Makefile and Kconfig: add configuration for mb12x2 ultrasonic proximity > driver > > Signed-off-by: Andreas Klinger <[email protected]> > --- > drivers/iio/proximity/Kconfig | 11 +++++++++++ > drivers/iio/proximity/Makefile | 1 + > 2 files changed, 12 insertions(+) > > diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig > index b99367a89f81..5d57ca44e30d 100644 > --- a/drivers/iio/proximity/Kconfig > +++ b/drivers/iio/proximity/Kconfig > @@ -45,6 +45,17 @@ config LIDAR_LITE_V2 > To compile this driver as a module, choose M here: the > module will be called pulsedlight-lite-v2 > > +config MB12X2 > + tristate "MaxSonar MB12X2 family ultrasonic sensors" > + depends on I2C > + help > + Say Y to build a driver for the ultrasonic sensors of MaxSonar > + with i2c interface. It can be used to measure the distance of > + objects. > + > + To compile this driver as a module, choose M here: the > + module will be called mb12x2. > + > config RFD77402 > tristate "RFD77402 ToF sensor" > depends on I2C > diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile > index 6d031f903c4c..c56b72a8be87 100644 > --- a/drivers/iio/proximity/Makefile > +++ b/drivers/iio/proximity/Makefile > @@ -6,6 +6,7 @@ > # When adding new entries keep the list in alphabetical order > obj-$(CONFIG_AS3935) += as3935.o > obj-$(CONFIG_ISL29501) += isl29501.o > +obj-$(CONFIG_MB12X2) += mb12x2.o
This commit will fail to build, as you add the source file only in 3/4. It needs to be in this patch. Regards, Andreas > obj-$(CONFIG_LIDAR_LITE_V2) += pulsedlight-lidar-lite-v2.o > obj-$(CONFIG_RFD77402) += rfd77402.o > obj-$(CONFIG_SRF04) += srf04.o > -- SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Felix Imendörffer, Jane Smithard, Graham Norton HRB 21284 (AG Nürnberg)
