I am an engineer in the software team at SUNIX Inc.,
maintain SUNIX Multi-I/O Board Device driver,we plan to submit drivers to
the kernel,therefore,i want to modify file for resolve driver conflict issue.
---
tty/serial/8250/8250_pci.c | 163 ++++++++++++++++++++++++++++++++++++-
1 file changed, 162 insertions(+), 1 deletion(-)
diff --git a/tty/serial/8250/8250_pci.c b/tty/serial/8250/8250_pci.c
index e4bb1bf3..48bd694a 100644
--- a/tty/serial/8250/8250_pci.c
+++ b/tty/serial/8250/8250_pci.c
@@ -519,6 +519,116 @@ static int pci_siig_setup(struct serial_private *priv,
return setup_port(priv, port, bar, offset, 0);
}
+/*
+ * Timedia has an explosion of boards, and to avoid the PCI table from
+ * growing *huge*, we use this function to collapse some 70 entries
+ * in the PCI table into one, for sanity's and compactness's sake.
+ */
+static const unsigned short timedia_single_port[] = {
+ 0x4025, 0x4027, 0x4028, 0x5025, 0x5027, 0
+};
+
+static const unsigned short timedia_dual_port[] = {
+ 0x0002, 0x4036, 0x4037, 0x4038, 0x4078, 0x4079, 0x4085,
+ 0x4088, 0x4089, 0x5037, 0x5078, 0x5079, 0x5085, 0x6079,
+ 0x7079, 0x8079, 0x8137, 0x8138, 0x8237, 0x8238, 0x9079,
+ 0x9137, 0x9138, 0x9237, 0x9238, 0xA079, 0xB079, 0xC079,
+ 0xD079, 0
+};
+
+static const unsigned short timedia_quad_port[] = {
+ 0x4055, 0x4056, 0x4095, 0x4096, 0x5056, 0x8156, 0x8157,
+ 0x8256, 0x8257, 0x9056, 0x9156, 0x9157, 0x9158, 0x9159,
+ 0x9256, 0x9257, 0xA056, 0xA157, 0xA158, 0xA159, 0xB056,
+ 0xB157, 0
+};
+
+static const unsigned short timedia_eight_port[] = {
+ 0x4065, 0x4066, 0x5065, 0x5066, 0x8166, 0x9066, 0x9166,
+ 0x9167, 0x9168, 0xA066, 0xA167, 0xA168, 0
+};
+
+static const struct timedia_struct {
+ int num;
+ const unsigned short *ids;
+} timedia_data[] = {
+ { 1, timedia_single_port },
+ { 2, timedia_dual_port },
+ { 4, timedia_quad_port },
+ { 8, timedia_eight_port }
+};
+
+/*
+ * There are nearly 70 different Timedia/SUNIX PCI serial devices. Instead of
+ * listing them individually, this driver merely grabs them all with
+ * PCI_ANY_ID. Some of these devices, however, also feature a parallel port,
+ * and should be left free to be claimed by parport_serial instead.
+ */
+static int pci_timedia_probe(struct pci_dev *dev)
+{
+ /*
+ * Check the third digit of the subdevice ID
+ * (0,2,3,5,6: serial only -- 7,8,9: serial + parallel)
+ */
+ if ((dev->subsystem_device & 0x00f0) >= 0x70) {
+ dev_info(&dev->dev,
+ "ignoring Timedia subdevice %04x for parport_serial\n",
+ dev->subsystem_device);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int pci_timedia_init(struct pci_dev *dev)
+{
+ const unsigned short *ids;
+ int i, j;
+
+ for (i = 0; i < ARRAY_SIZE(timedia_data); i++) {
+ ids = timedia_data[i].ids;
+ for (j = 0; ids[j]; j++)
+ if (dev->subsystem_device == ids[j])
+ return timedia_data[i].num;
+ }
+ return 0;
+}
+
+/*
+ * Timedia/SUNIX uses a mixture of BARs and offsets
+ * Ugh, this is ugly as all hell --- TYT
+ */
+static int
+pci_timedia_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ unsigned int bar = 0, offset = board->first_offset;
+
+ switch (idx) {
+ case 0:
+ bar = 0;
+ break;
+ case 1:
+ offset = board->uart_offset;
+ bar = 0;
+ break;
+ case 2:
+ bar = 1;
+ break;
+ case 3:
+ offset = board->uart_offset;
+ /* FALLTHROUGH */
+ case 4: /* BAR 2 */
+ case 5: /* BAR 3 */
+ case 6: /* BAR 4 */
+ case 7: /* BAR 5 */
+ bar = idx - 2;
+ }
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
/*
* Some Titan cards are also a little weird
*/
@@ -1993,7 +2103,42 @@ static struct pci_serial_quirk pci_serial_quirks[]
__refdata = {
.subdevice = PCI_ANY_ID,
.setup = titan_400l_800l_setup,
},
-
+ /*
+ * Timedia cards
+ */
+ {
+ .vendor = PCI_VENDOR_ID_TIMEDIA,
+ .device = PCI_DEVICE_ID_TIMEDIA_1889,
+ .subvendor = PCI_VENDOR_ID_TIMEDIA,
+ .subdevice = PCI_ANY_ID,
+ .probe = pci_timedia_probe,
+ .init = pci_timedia_init,
+ .setup = pci_timedia_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_TIMEDIA,
+ .device = PCI_ANY_ID,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_timedia_setup,
+ },
+ /*
+ * SUNIX (Timedia) cards
+ * Do not "probe" for these cards as there is at least one combination
+ * card that should be handled by parport_pc that doesn't match the
+ * rule in pci_timedia_probe.
+ * It is part number is MIO5079A but its subdevice ID is 0x0102.
+ * There are some boards with part number SER5037AL that report
+ * subdevice ID 0x0002.
+ */
+ {
+ .vendor = PCI_VENDOR_ID_SUNIX,
+ .device = PCI_DEVICE_ID_SUNIX_1999,
+ .subvendor = PCI_VENDOR_ID_SUNIX,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_timedia_init,
+ .setup = pci_timedia_setup,
+ },
/*
* Xircom cards
*/
@@ -4231,6 +4376,22 @@ static const struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_16PCI95N,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_oxsemi },
+ { PCI_VENDOR_ID_TIMEDIA, PCI_DEVICE_ID_TIMEDIA_1889,
+ PCI_VENDOR_ID_TIMEDIA, PCI_ANY_ID, 0, 0,
+ pbn_b0_bt_1_921600 },
+
+ /*
+ * SUNIX (TIMEDIA)
+ */
+ { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+ PCI_VENDOR_ID_SUNIX, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xffff00,
+ pbn_b0_bt_1_921600 },
+
+ { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999,
+ PCI_VENDOR_ID_SUNIX, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00,
+ pbn_b0_bt_1_921600 },
/*
* AFAVLAB serial card, from Harald Welte <[email protected]>
--
2.17.1
