From: Phil Edworthy <[email protected]> The Synopsys SSI Controller has an interface clock, but most SoCs hide this away. However, on some SoCs you need to explicity enable the interface clock in order to access the registers. Therefore, add support for an optional interface clock.
Signed-off-by: Phil Edworthy <[email protected]> Signed-off-by: Gareth Williams <[email protected]> --- drivers/spi/spi-dw-mmio.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c index 4bd59a9..7cbc173 100644 --- a/drivers/spi/spi-dw-mmio.c +++ b/drivers/spi/spi-dw-mmio.c @@ -30,6 +30,7 @@ struct dw_spi_mmio { struct dw_spi dws; struct clk *clk; + struct clk *pclk; void *priv; }; @@ -172,6 +173,14 @@ static int dw_spi_mmio_probe(struct platform_device *pdev) if (ret) return ret; + /* Optional interface clock */ + dwsmmio->pclk = devm_clk_get_optional(&pdev->dev, "pclk"); + if (IS_ERR(dwsmmio->pclk)) + return PTR_ERR(dwsmmio->pclk); + ret = clk_prepare_enable(dwsmmio->pclk); + if (ret) + goto out_clk; + dws->bus_num = pdev->id; dws->max_freq = clk_get_rate(dwsmmio->clk); @@ -199,6 +208,8 @@ static int dw_spi_mmio_probe(struct platform_device *pdev) return 0; out: + clk_disable_unprepare(dwsmmio->pclk); +out_clk: clk_disable_unprepare(dwsmmio->clk); return ret; } @@ -208,6 +219,7 @@ static int dw_spi_mmio_remove(struct platform_device *pdev) struct dw_spi_mmio *dwsmmio = platform_get_drvdata(pdev); dw_spi_remove_host(&dwsmmio->dws); + clk_disable_unprepare(dwsmmio->pclk); clk_disable_unprepare(dwsmmio->clk); return 0; -- 2.7.4
