Hi, Bibby: On Wed, 2019-03-06 at 17:50 +0800, Bibby Hsieh wrote: > cmdq driver provide a function that get the relationship > of sub system number from device node for client. > add specification for #subsys-cells, mediatek,gce-subsys. > > Signed-off-by: Bibby Hsieh <bibby.hs...@mediatek.com> > --- > Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 11 ++++++++++- > 1 file changed, 10 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > index 812698f..07b2adf 100644 > --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > @@ -26,6 +26,13 @@ Required properties: > phandle: Label name of a gce node. > event_number: the event number defined in 'dt-bindings/gce/mt8173-gce.h' > or 'dt-binding/gce/mt8183-gce.h'. > +#subsys-cells: Should be 2. > + <&phandle register_base_address subsys_number> > + phandle: Label name of a gce node. > + register_base_address: the register base address that client > + want to write or read. > + subsys_number: specify the sub-system id which is corresponding > + to the register address.
I would like this description similar to 'reg' property. For example: If a client want GCE to access register from 0x14002000 ~ 0x14002fff, in the view of GCE, it would access register from SUBSYS_1400XXXX with an offset 0x2000 to SUBSYS_1400XXXX with an offset 0x2fff So the description could be: mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x2000 0x1000> the second parameter is subsys, the third parameter is start offset, and the fourth parameter is the size. I change the property name to 'mediatek,gce-client-reg' because this whole property describe the range GCE access rather than the subsys. Regards, CK > > Required properties for a client device: > - mboxes: Client use mailbox to communicate with GCE, it should have this > @@ -50,6 +57,7 @@ Example: > thread-num = CMDQ_THR_MAX_COUNT; > #mbox-cells = <3>; > #event-cells = <1>; > + #subsys-cells = <2>; > }; > > Example for a client device: > @@ -58,7 +66,8 @@ Example for a client device: > compatible = "mediatek,mt8173-mmsys"; > mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>, > <&gce 1 CMDQ_THR_PRIO_LOWEST 1>; > - mediatek,gce-subsys = <SUBSYS_1400XXXX>; > + mediatek,gce-subsys = <&gce 0x14000000 SUBSYS_1400XXXX>, > + <&gce 0x14010000 SUBSYS_1401XXXX>; > mediatek,gce-event-names = "rdma0_sof", > "rsz0_sof"; > mediatek,gce-events = <&gce CMDQ_EVENT_MDP_RDMA0_SOF>,
