The correct DT property for specifying a GPIO used for reset is "reset-gpios", the driver now accepts this name, use it here.
Signed-off-by: Andrew F. Davis <[email protected]> --- arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi index 9cb9a7439121..aee9221f0f29 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi @@ -311,7 +311,7 @@ tlv320aic3105: codec@18 { compatible = "ti,tlv320aic3x"; reg = <0x18>; - gpio-reset = <&gpio5 17 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>; clocks = <&clks IMX6QDL_CLK_CKO>; ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */ /* Regulators */ -- 2.21.0
