On Sun, Apr 21, 2019 at 07:09:30PM +0000, Han Nandor wrote:
> Add the device tree bindings document for the NVMEM based reboot-mode
> driver.
>
> Signed-off-by: Nandor Han <[email protected]>
> ---
> .../power/reset/nvmem-reboot-mode.txt | 32 +++++++++++++++++++
> 1 file changed, 32 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
>
> diff --git
> a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
> b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
> new file mode 100644
> index 000000000000..2e1b86c31cb3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt
> @@ -0,0 +1,32 @@
> +NVMEM reboot mode driver
> +
> +This driver gets reboot mode magic value from reboot-mode driver
> +and stores it in a NVMEM cell named "reboot-mode". Then the bootloader
> +can read it and take different action according to the magic
> +value stored.
This is also assuming the nvmem is writeable which is more often not the
case.
Is your usecase a platform that supports pstore? Adding on to that
binding might be a better fit.
> +
> +This DT node should be represented as a sub-node of a "simple-mfd"
> +node.
> +
> +Required properties:
> +- compatible: should be "nvmem-reboot-mode".
> +- nvmem-cells: A phandle to the reboot mode provided by a nvmem device.
> +- nvmem-cell-names: Should be "reboot-mode".
> +
> +The rest of the properties should follow the generic reboot-mode description
> +found in reboot-mode.txt
> +
> +Example:
> + reboot-mode-nvmem@0 {
What's this node for?
> + compatible = "simple-mfd";
I only see 1 function.
> + reboot-mode {
> + compatible = "nvmem-reboot-mode";
> + nvmem-cells = <&reboot_mode>;
> + nvmem-cell-names = "reboot-mode";
> +
> + mode-normal = <0xAAAA5501>;
> + mode-bootloader = <0xBBBB5500>;
> + mode-recovery = <0xCCCC5502>;
> + mode-test = <0xDDDD5503>;
> + };
> + };
> --
> 2.17.2
>
