On Fri, 03 May 2019, Yangtao Li wrote:

> This patch adds documentation for the H6 GPADC binding.
> 
> Signed-off-by: Yangtao Li <[email protected]>
> ---
>  .../devicetree/bindings/mfd/sun4i-gpadc.txt   | 27 +++++++++++++++++--
>  1 file changed, 25 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt 
> b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> index 86dd8191b04c..eeaf27eb8abd 100644
> --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> @@ -5,11 +5,22 @@ and sometimes as a touchscreen controller.
>  
>  Required properties:
>    - compatible: "allwinner,sun8i-a33-ths",
> +             "allwinner,sun50i-h6-ths",
>    - reg: mmio address range of the chip,
> -  - #thermal-sensor-cells: shall be 0,
> +  - #thermal-sensor-cells: shall be 0 for sun8i-a33-ths,
> +                        shall be 1 for sun50i-h6-ths,
>    - #io-channel-cells: shall be 0,
>  
> -Example:
> +Optional properties:
> +  - clocks: Must contain an entry for each entry in clock-names.
> +         See common clock-bindings.txt for details.

Nit: This should be a relative path, like the reset.txt below.

> +  - clock-names: A list of clock names. For sun50i-h6-ths, it must contain
> +              "bus".
> +  - resets: Must contain an entry for each entry in reset-names.
> +         See ../reset/reset.txt for details.
> +  - reset-names: For sun50i-h6-ths, it must contain "bus".
> +
> +Example1:
>       ths: ths@1c25000 {
>               compatible = "allwinner,sun8i-a33-ths";
>               reg = <0x01c25000 0x100>;
> @@ -17,6 +28,18 @@ Example:
>               #io-channel-cells = <0>;
>       };
>  
> +Example2:
> +     ths: ths@1c25000 {
> +             compatible = "allwinner,sun50i-h6-ths";
> +             reg = <0x05070400 0x100>;
> +             clocks = <&ccu CLK_BUS_THS>;
> +             clock-names = "bus";
> +             resets = <&ccu RST_BUS_THS>;
> +             reset-names = "bus";
> +             #thermal-sensor-cells = <1>;
> +             #io-channel-cells = <0>;
> +       };
> +
>  sun4i, sun5i and sun6i SoCs are also supported via the older binding:
>  
>  sun4i resistive touchscreen controller

-- 
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

Reply via email to