This patch adds device device tree bindings for the vibrator found on the LG Nexus 5 (hammerhead) phone.
Signed-off-by: Brian Masney <masn...@onstation.org> --- This is a resend of the following patch that has missed the last two merge windows: https://lore.kernel.org/lkml/20190206013329.18195-4-masn...@onstation.org/ .../qcom-msm8974-lge-nexus5-hammerhead.dts | 31 +++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index b3b04736a159..1fd9f429f34a 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -5,6 +5,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/clock/qcom,mmcc-msm8974.h> / { model = "LGE MSM 8974 HAMMERHEAD"; @@ -306,6 +307,36 @@ input-enable; }; }; + + vibrator_pin: vibrator { + pwm { + pins = "gpio27"; + function = "gp1_clk"; + + drive-strength = <6>; + bias-disable; + }; + + enable { + pins = "gpio60"; + function = "gpio"; + }; + }; + }; + + vibrator@fd8c3450 { + compatible = "qcom,msm8974-vibrator"; + reg = <0xfd8c3450 0x400>; + + vcc-supply = <&pm8941_l19>; + + clocks = <&mmcc CAMSS_GP1_CLK>; + clock-names = "pwm"; + + enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&vibrator_pin>; }; sdhci@f9824900 { -- 2.17.2
